1336F-A020-AN-EN-L4

The Allen-Bradley 1336F-A020-AN-EN-L4 AC drive is an adjustable frequency drive. It belongs to the 1336 PLUS II series of adjustable frequency drives that are used to control the speed and torque of different types of industrial motors The output power rating of the drive is 20 Horsepower. However, this output power level is only available when the 1336F-A020-AN-EN-L4 drive is operated within the recommended ambient conditions and when 3-phase AC voltage is applied to the drive input. Operation of the drive under ambient conditions that are not recommended can lead to component damage and even to device failure. The application of single-phase AC power to the drive causes 50% output derating. The range of input voltage for which the 1336F-A020-AN-EN-L4 drive is designed is 200 to 240 Volts AC. The drive enclosure is open with an IP 00 protection rating. The language supported by the drive’s interfaces is English.

The control interface on the Allen-Bradley 1336F-A020-AN-EN-L4 1336 PLUS II series adjustable frequency drive is a TTL contact type of interface. The frame size of the drive is Size C. The drive is made with several ESD-sensitive parts. Therefore, all of the standard ESD precautions should be implemented when working with the drive. Maintenance should only be performed after the 1336F-A020-AN-EN-L4 drive has been powered off, and to avoid electric shock, it should be verified that the bus capacitors have discharged completely and that the voltage rating is 0 Volts DC. The bus capacitor voltage can be measured on terminals that are provided on Terminal Block 1. A nameplate for the drive is attached to the mounting plate on the main control board. The ambient operating temperature range for the 1336F-A020-AN-EN-L4 drive is from 0 to 50 degrees Celsius. The maximum altitude that the drive can operate at is 1000 meters above sea level.