DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1336F-AA5. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336F-AA5 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336F-AA5 units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336F-AA5 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336F-AA5 units instead of migration.
sThe Allen-Bradley 1336F-AA5 NEMA Type 1 Enclosure, is a NEMA Type 1 rated indoor enclosure for the Allen-Bradley 1336 Plus II Frame C Drives with a heatsink at the back which houses and protects important drive components from outside contact and debris. It is built for indoor environments without moisture, and it is built to protect personnel and equipment from contact with the enclosed drive components and voltage. The 1336F-AA5, like every NEMA Type 1 rated enclosure, is made to pass the rod entry and the rust resistance design tests, and it is designed with slotted openings at the door and sides, which permit the free exchange of inside and outside air. The back plate chassis for heat installation is made of 12-gauge sheet steel with low gloss standard light grey paints and an ASA 61-rated GRAY finish.
The 1336F-AA5’s heatsink is made of aluminum, with a bronze chromate finish, and the entire enclosure, including the sides and door, is made of 14-gauge sheet steel, with a standard light grey paint finish. It has a floor mounting option which allows for the side to side mounting of two 1336 Force drives with zero clearance between them, and it also allows for tight mounting against the wall. The 1336F-AA5 provides an ambient operating temperature range of 0 to 40 °C (32 to 104 °F) around the components installed in its cabinets with a relative humidity range of 5 to 95% (non-condensing), and it provides a storage temperature range of - 40 to 70 °C (- 40 to 158 °F). It has a net weight of 95Kg, and total dimensions of 855.0mm x 1550.0mm x 375.4mm.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336F-AA5. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336F-AA5 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336F-AA5 Ser A
|
1336F-AA5/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1336F-AA5 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1336F-AA5 units instead of migration.
The Allen-Bradley 1336F-AA5 NEMA Type 1 Enclosure, is a NEMA Type 1 rated indoor enclosure for the Allen-Bradley 1336 Plus II Frame C Drives with a heatsink at the back which houses and protects important drive components from outside contact and debris. It is built for indoor environments without moisture, and it is built to protect personnel and equipment from contact with the enclosed drive components and voltage. The 1336F-AA5, like every NEMA Type 1 rated enclosure, is made to pass the rod entry and the rust resistance design tests, and it is designed with slotted openings at the door and sides, which permit the free exchange of inside and outside air. The back plate chassis for heat installation is made of 12-gauge sheet steel with low gloss standard light grey paints and an ASA 61-rated GRAY finish.
The 1336F-AA5’s heatsink is made of aluminum, with a bronze chromate finish, and the entire enclosure, including the sides and door, is made of 14-gauge sheet steel, with a standard light grey paint finish. It has a floor mounting option which allows for the side to side mounting of two 1336 Force drives with zero clearance between them, and it also allows for tight mounting against the wall. The 1336F-AA5 provides an ambient operating temperature range of 0 to 40 °C (32 to 104 °F) around the components installed in its cabinets with a relative humidity range of 5 to 95% (non-condensing), and it provides a storage temperature range of - 40 to 70 °C (- 40 to 158 °F). It has a net weight of 95Kg, and total dimensions of 855.0mm x 1550.0mm x 375.4mm.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336F-AA5. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1336F-AA5. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1336F-AA5 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1336F-AA5 Ser A
|
1336F-AA5/A, Series A, Rev A | Request Quote |