The Allen-Bradley 1336F-AQF05-AA-EN-HC is an adjustable frequency drive that has been programmed in English. It also has Allen-Bradley’s Sensorless Vector Control for maximum efficiency.

Keep the 1336F-AQF05-AA-EN-HC adjustable frequency drive away from electrostatic discharge (ESD). Several of the drive’s electronic components are sensitive to ESD, which can disrupt transmissions or even damage the equipment.  To prevent disruptions and damage, make sure to follow all the applicable protocols for reducing ESD when installing, operating, or repairing the 1336F-AQF05-AA-EN-HC adjustable frequency drive.

The 1336F-AQF05-AA-EN-HC drive is protected from dust, debris, and moisture by an IP 20 NEMA 1 enclosure. One 1336F-AQF05-AA-EN-HC drive can be mounted vertically or horizontally next to another 1336F-AQF05-AA-EN-HC drive or another 1336 drive, but make sure that there is enough space between the drives for proper ventilation. If the drives are stacked vertically, they need at least 6 inches of air flow space between them. If they are mounted horizontally, they need at least 4 inches of air flow space between them.

Make sure that the 1336F-AQF05-AA-EN-HC drive has a power distribution system that balanced and grounded with the proper fuses. The 1336F-AQF05-AA-EN-HC can use UL Class CC, J, T, and RK1 fuses or IEC-BS88 fuses.

The 1336F-AQF05-AA-EN-HC adjustable frequency drive uses input signals to start and stop its motor. These signals should be constant. An input device that starts and stops the drive by frequently disconnecting and then reconnecting the line power may disrupt the drive’s settings, and it is not recommended. The 1336F-AQF05-AA-EN-HC can use an RFI filter to control its radio-frequency emissions.