The 1336F-AQF07-AJ-DE is a motor controller manufactured by Allen-Bradley. The controller and other controllers in the 1336 PLUS II series provide analog I/O configurations that have standard inputs and outputs and it provides the users with the option to replace the standard I/O with 2 option boards. The 1336F-AQF07-AJ-DE provides I/O connections via Terminal Block 2 (TB2). Other terminals found on TB2 are the digital outputs. The controller supports the use of common mode cores which assist in minimizing the common mode noise at the controller’s output. Additionally, the common mode cores help in protecting the 1336F-AQF07-AJ-DE against interference with other nearby electrical devices.

The Allen-Bradley 1336F-AQF07-AJ-DE, like other 1336 PLUS II series motor controllers, accommodates the Allen-Bradley 1321-M001 common mode choke which is used with the communication cables, including the analog signal cables. When interfacing the controller and the controlled motor, long motor cables should be avoided in order to reduce the chances of the standing wave effect, also known as the transmission line effect. Also, using inverter duty motors with phase-to-phase insulation ratings equal to or higher than 1200 Volts are recommended to reduce the standing wave effect. Where long cable motors cannot be avoided, the Allen-Bradley 1336F-AQF07-AJ-DE accommodates the use of a cable terminator or an output filter. The controller has its Horsepower rating capped at 0.56 Horsepower and its minimum input voltage rated at 200 Volts AC. The maximum input voltage rating for the 1336F-AQF07-AJ-DE stands at 240 Volts. However, the controller can also be run with a DC input voltage of 310 Volts DC.