The 1336F-AQF10-AA-IT is an AC drive from Allen-Bradley. The drive has a Horsepower rating of 0.75 Horsepower, an IP20 enclosure rating, and an Italian instruction manual. The 1336F-AQF10-AA-IT belongs to the Allen-Bradley 1336 PLUS II family of AC drives. To troubleshoot drives in this family, including the 1336F-AQF10-AA-IT, a Range DVM or a 1000 Volts VOM device is needed. When servicing the 1336F-AQF10-AA-IT, note that all of the PCB boards inside the drive are referenced to the ground (negative) except the main control board. Additionally, the control drive circuits and the power circuits are optically isolated. The 1336F-AQF10-AA-IT has -10 and +10 minimum and maximum voltage tolerances, respectively. For the frequency, the 1336F-AQF10-AA-IT, like other drives in the same family, has a frequency tolerance ranging from 48 Hertz to 62 Hertz. When operating at the rated current and line voltage, the drive has 97.5% efficiency.

The 1336F-AQF10-AA-IT, like other drives in the Allen-Bradley 1336 PLUS II family, is controlled by using sine-coded power width modulation (PWM) with a programmable carrier frequency. The output voltage for the drive ranges from 0 to the rated voltage while the frequency range (output) ranges from a minimum of 0 Hertz to a maximum of 400 Hertz. The Allen-Bradley 1336F-AQF10-AA-IT features 4 light-emitting diodes to indicate the status of the drive. The 1336F-AQF10-AA-IT, like the other 1336 PLUS II drives, supports user-installed options such as the contact closure and encoder feedback. It also accommodates the users’ analog interface kits such as the 1336F-LA3 which holds 2 isolated configurable outputs, and the 1336F-LA2 which holds 2 isolated configurable inputs.