The Allen-Bradley 1336F-AQF10-AN-EN-HCS2-L4 drive is a 1336 PLUS II series adjustable frequency drive. It is designed to control a motor by adjusting the level of frequency that it applies to the motor in order to adjust the motor’s operating speed or torque. Furthermore, the 1336F-AQF10-AN-EN-HCS2-L4 adjustable frequency drive is designed to adjust its frequency as frictionlessly as possible so that it will not wear out the motor and its components too quickly or cause damage through abrupt changes in the motor’s speed or torque. This drive supports the Volts per Hertz control mode and the sensorless vector control mode, and both control modes can be customized or fine tuned by the users. The 1336F-AQF10-AN-EN-HCS2-L4 adjustable frequency drive can operate in a temperature range from 0 to 50 degrees Celsius because it has an open enclosure.

The protection rating of the Allen-Bradley 1336F-AQF10-AN-EN-HCS2-L4 1336 PLUS II series adjustable frequency drive is only IP 00 because of the drive’s open enclosure. The open enclosure allows the drive to dissipate heat quickly and efficiently, but it also means that the drive is susceptible to damage from liquids or dust. As a result, the 1336F-AQF10-AN-EN-HCS2-L4 adjustable frequency drive should not be used outdoors, and installing it in a cabinet for protection in indoor environments is recommended. This drive supports AC and DC operating voltage. Its AC operating voltage range is from 200 to 240 Volts AC at 50 to 60 Hertz operating frequency, and its DC operating voltage rating is 310 Volts DC. The 1336F-AQF10-AN-EN-HCS2-L4 adjustable frequency drive has a TTL contact control interface and a programmer/controller HMI with a digital potentiometer and upload/download capabilities.