The 1.5 Horsepower 1336F-AQF15-AF-EN drive from the Allen-Bradley 1336 PLUS II series is an advanced AC drive. The Allen-Bradley 1336 PLUS II series supports 200 to 240, 380 to 480 and 500 to 600 Volts AC input voltage. The 1336 drives support 1-phase and 3-phase input. Note that the use of 1-phase input causes output derating by a factor of up to 50% of the rated current that is available at the drive’s output. The 1336F-AQF15-AF-EN 1336 PLUS II drive is designed for 200 to 240 Volts AC input voltage. The rated input power and current are 2.9 kVA and 7.3 Amps, respectively. The drive output power and current ratings are 2.4 kVA and 6 Amps, respectively. Drive configuration, monitoring, and troubleshooting can be performed through the onboard HMI which supports English as its programming language.

The A2-frame 1336F-AQF15-AF-EN is available in a NEMA Type 4 enclosure which is rated as an IP65 enclosure. The weight of the drive enclosure is approximately 17.9 kilograms. The dimensions of the drive are 525 x 430 x 350 millimeters. The recommended storage and operating temperature ranges for the drive are from -40 to 158 and from 32 to 104 degrees Fahrenheit, respectively. To prevent issues during the drive startup, the wiring of the 1336F-AQF15-AF-EN should be carried out according to the manufacturer’s instructions. The drive should be mounted vertically. The spacing recommendations from Allen-Bradley are as follows: 6 inches of vertical spacing and 4 inches of horizontal spacing between adjacent drives. The drives should be connected to the system ground at the PE terminal (power ground) which is located on the TB1 terminal block. Furthermore, the ground impedance value should be made according to the local regulations and it should also be checked periodically.