1336F-AQF20-AN-EN-HAS2-L6

The 1336F-AQF20-AN-EN-HAS2-L6 1336 PLUS II series digital adjustable frequency drive is an Allen-Bradley adjustable frequency drive. This drive supports sensorless vector motor control, and this control technology provides exceptional low-speed torque, improved acceleration control, a fast acceleration mode, a fast flux-up mode, and selectable Volts per Hertz control. The proportional and integral gain control on the drive enables simple process control. Slip compensation enables an automatic increase in the output frequency for motor slip without causing a loss in motor speed. The power loss ride-thru allows the 1336F-AQF20-AN-EN-HAS2-L6 drive to ride through short interruptions in power. The auto economizer feature combines an economizer algorithm with stator flux control to help save energy and reduce expenses. The 1336F-AQF20-AN-EN-HAS2-L6 drive includes a HMI with an LCD screen and a 5-key keypad. This HMI is located on the front panel of the drive.

The Allen-Bradley 1336F-AQF20-AN-EN-HAS2-L6 1336 PLUS II adjustable frequency drive can operate at 310 Volts DC input or at 200 to 240 Volts AC input. For AC input, both 3-phase and single-phase power supplies are supported. The nominal power output rating of the drive is 2 Horsepower. The drive HMI includes a digital potentiometer and it is a programmer/controller HMI. The control interface on the 1336F-AQF20-AN-EN-HAS2-L6 drive is rated for 115 Volts AC. The drive housing is open and it has an environmental protection rating of IP 00. This rating signifies that the enclosure does not provide protection against liquids or solid particles like dust. Therefore, the 1336F-AQF20-AN-EN-HAS2-L6 digital drive should be mounted inside a control cabinet that provides it with adequate protection from dust and moisture. Only qualified and trained technical personnel should commission and install the drive system.