The Allen-Bradley 1336F-AQF30-AA-EN-HAS1-L6E drive is an AC/DC drive. It is part of the 1336 PLUS II series and it can be connected to an AC or DC input voltage source. The 1336F-AQF30-AA-EN-HAS1-L6E drive is designed for 200 to 240 Volts AC input and for 310 Volts DC input. Additionally, the drive can be connected to either single-phase or 3-phase AC power supplies. The nominal output power rating of 3 Horsepower is delivered by the 1336F-AQF30-AA-EN-HAS1-L6E drive only when 3-phase AC input is used. The nominal output power rating is valid for 4 kilohertz of carrier frequency, a 0 to 40 degrees Celsius ambient temperature range, and for 1000 meters of maximum elevation. The drive’s sine-coded PWM control method supports carrier frequencies ranging from 2 to 8 kilohertz. The HMI on the 1336F-AQF30-AA-EN-HAS1-L6E AC/DC drive operates in English.

Additionally, the HMI on the Allen-Bradley 1336F-AQF30-AA-EN-HAS1-L6E 1336 PLUS II drive is a programmer/controller HMI and it has an analog potentiometer. The 1336F-AQF30-AA-EN-HAS1-L6E drive also features a 115 Volts AC rated control interface and it supports encoder feedback. The drive’s frame size is Size A3 and the drive’s weight is 6.71 kilograms. The dimensions of the IP 20 rated enclosure are 290 x 215.9 x 105.4 millimeters. The minimum horizontal separation between adjacent drives should be 101.6 millimeters and the minimum vertical separation between adjacent drives should be 152.4 millimeters. The ambient temperature will exceed the permitted limits and the drive may overheat if these recommendations are violated. The 1336F-AQF30-AA-EN-HAS1-L6E drive is designed for cabinet mounting and it cools down via natural convection. Forced air cooling can also be used to improve the drive’s heat dissipation. The non-condensing relative humidity level around the drive should not exceed 95%.