Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-AQF30-AA-EN-HCS1-L6

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-AQF30-AA-EN-HCS1-L6

|
Need a Specific Revision?

The Allen-Bradley 1336F-AQF30-AA-EN-HCS1-L6 variable speed drive has been manufactured as part of the 1336 PLUS II series. This drive comes in a NEMA 1 or IP 20 rated protective enclosure. This drive must not come into contact with corrosive materials.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-AQF30-AA-EN-HCS1-L6

ManufacturerAllen Bradley
CategoryDrives
Product Line1336 PLUS II Drives
Part Number1336F-AQF30-AA-EN-HCS1-L6
Weight40.00 lbs (18.14 kg)
Voltage Rating200-240V AC or 310V DC
Frequency47-63 Hz
Nominal HP Rating3 Horsepower
Enclosure TypeIP 20 (NEMA 1)
Language GroupEnglish
Communication OptionsNone
Control Interface Options115V AC Interface
HMIProgrammer/Controller with Analog Potentiometer and Upload/Download Capability
Efficiency97.5%
Heatsink ThermistorMonitored by Microprocessor
Request a Repair

The Allen-Bradley 1336F-AQF30-AA-EN-HCS1-L6 1336 PLUS II series variable speed drive has been designed to control the operating speed and torque ratings of a variable speed motor. This drive has been equipped with multiple features that enable it to be programmed locally and to be paired with multiple devices in a PLC system. These features include a 115 Volts AC control interface and a snap-in human-machine interface module that comes with an analog potentiometer and provides upload and download capabilities that enable the drive to send and receive data from different devices on the same network. The Allen-Bradley 1336F-AQF30-AA-EN-HCS1-L6 variable speed drive operates with an AC input voltage range of 200 to 240 Volts AC at a frequency range of 47 to 63 Hertz and with a DC input voltage rating of 310 Volts DC. This drive also supports a Horsepower output rating of 2.2 and 3 Horsepower. The motor that is controlled by this drive needs to be compatible with all of its specifications.

The Allen-Bradley 1336F-AQF30-AA-EN-HCS1-L6 1336 PLUS II series variable speed drive comes with an English language module that causes its interfaces to operate in English. It does not come with any built-in communication options. This drive can operate at an efficiency level of up to 97.5% when it is operating within all of its required ambient conditions. Although the Allen-Bradley 1336F-AQF30-AA-EN-HCS1-L6 variable speed drive comes with multiple features that are designed to combat overheating, it is still important to monitor the ambient air temperature around the drive to ensure that it remains steady and moderate at all times to extend the operating life of the drive as much as possible. Since the drive comes enclosed in a protective housing or enclosure, the ambient temperature must not exceed 40 degrees Celsius. The drive has a microprocessor that monitors the temperature and a DC cooling fan that can be used to cool it down. Clearances must be left on each side of the drive to help it release heat as efficiently as possible.