1336F-AQF30-AN-EN-GMS1-L6

The 1336F-AQF30-AN-EN-GMS1-L6 drive is an Allen-Bradley/Rockwell Automation drive with adjustable frequency. It is an AC and DC-powered drive from the Allen-Bradley 1336 PLUS II series of adjustable frequency drives. This drive operates input supply voltage ratings of 200 to 240 Volts AC or 310 volts DC. At the nominal voltage, carrier frequency, ambient temperature, and installation altitude ratings, it generates 2.2 kilowatts or 3 Horsepower of maximum motor output power. The drive’s switching frequency or carrier frequency can be adjusted between 2 and 10 kilohertz to achieve the desired speed and torque ratings in the motor that the drive controls. The 1336F-AQF30-AN-EN-GMS1-L6 adjustable frequency drive features a Size A3 frame and an open type of enclosure. The drive is not suited for outdoor usage and is typically used in control cabinets in indoor environments to protect it. The drive’s rated operating current is 12 Amps, and its apparent power rating is 4.8 kVA.

The Allen-Bradley/Rockwell Automation 1336F-AQF30-AN-EN-GMS1-L6 1336 PLUS II series adjustable frequency drive has a +/-10 percent voltage tolerance rating based on its rated input voltage. This drive requires a balanced 3-phase AC induction motor or a permanent magnet synchronous motor as its load. It comes standard with a factory-mounted communication interface option known as the GMS1 communication interface option. The GMS1 communication interface option is a single-point RIO (Remote Input and Output) interface board that can be configured for 1/4, 1/2, 3/4, or full racks while supporting baud rates of 57.6, 115, and 230 kiloBaud. Additionally, a standard control interface card known as the L6 control interface card is also supplied with this drive at the factory. The L6 control interface card is rated at 115 Volts AC and it allows various signals and commands to be sent via contact closures to the drive. The 1336F-AQF30-AN-EN-GMS1-L6 drive operates in English because it has an English language module.