1336F-AQF30-AN-EN-HAS1-L4

The 1336F-AQF30-AN-EN-HAS1-L4 variable frequency drive is a digital drive that can control AC motors. It belongs to the 1336 PLUS II series of drives from Allen-Bradley. The housing of the drive is open and the protection rating of the drive housing is IP 00. This indicates that the drive is unprotected from liquids and dust. A control cabinet should be used to protect the drive. The 1336F-AQF30-AN-EN-HAS1-L4 drive is designed for vertical mounting. A minimum of 4 inches of horizontal spacing and 6 inches of vertical spacing around the drive are recommended by Allen Bradley for ensuring proper airflow The 1336F-AQF30-AN-EN-HAS1-L4 drive is designed for an ambient temperature range of 0 to 50 degrees Celsius. At higher ambient temperatures, the internal temperature of the drive could exceed safe limits and this could lead to device malfunction or failure. The relative humidity is from 5 to 95% without condensation. The recommended operating altitude for the drive is from 0 to 1000 meters above sea level.

The output of the Allen-Bradley 1336F-AQF30-AN-EN-HAS1-L4 1336 PLUS II series variable frequency drive derates if it is operated outside the limits of its specified ambient conditions. The nominal power rating of the 1336F-AQF30-AN-EN-HAS1-L4 drive is 3 Horsepower when it is operated with 3-phase AC input or DC input. The AC input voltage range is 200 to 240 Volts AC and the DC input voltage rating is 310 Volts DC. The output frequency range of this variable frequency drive is from 0 to 400 Hertz. The 1336F-AQF30-AN-EN-HAS1-L4 drive supports sine-coded PWM control and configurable carrier frequency. The HMI on the drive includes an analog potentiometer and it is a programmer/controller HMI. The control interface on the 1336F-AQF30-AN-EN-HAS1-L4 variable frequency drive is a TTL contact interface. Only trained and qualified technicians should install and service the drive.