1336F-AQF30-AN-EN-HAS1-LA7

The Allen-Bradley 1336F-AQF30-AN-EN-HAS1-LA7 1336 PLUS II series drive is an AC/DC adjustable frequency drive. It is designed for AC or DC input voltage and it can be connected directly to input power systems rated for 200 to 240 Volts AC or for 310 Volts DC. Note that suitable isolation may be required if the drive’s voltage supply system experiences sudden surges or spikes. The 1336F-AQF30-AN-EN-HAS1-LA7 drive does not feature integrated input short-circuit protection. For this reason, either a circuit breaker or a suitable fuse can be used on the input side of the drive. Depending on the type of fuse that is used, the minimum fuse rating is 15 Amps and the maximum fuse rating is 25 Amps. The maximum circuit breaker rating for the 1336F-AQF30-AN-EN-HAS1-LA7 drive is 35 Amps. If a motor circuit protector is used on the output side, it can have a maximum current rating of 15 Amps.

The Allen-Bradley 1336F-AQF30-AN-EN-HAS1-LA7 1336 PLUS II series adjustable frequency drive features built-in analog interface options which include one isolated bi-polar input and one isolated configurable output. The input can be used at +/-10 Volts or +/-20 milliamps. The drive’s HMI is a programmer and controller HMI with an analog potentiometer. The rated output power of the 1336F-AQF30-AN-EN-HAS1-LA7 drive is 3 Horsepower. The 1336F-AQF30-AN-EN-HAS1-LA7 drive is an open drive with an IP 00 environmental protection rating. It has ESD-sensitive components and requires use of static control procedures to avoid ESD during operation or maintenance. Only trained technicians who have prior experience with 1336 PLUS II drives should install and operate the 1336F-AQF30-AN-EN-HAS1-LA7 drive. To avoid electric shock during maintenance, the drive must be disconnected from the input power and the bus capacitors must fully discharge.