The Allen-Bradley 1336F-AQF30-AN-EN-HASB 1336 PLUS II series drive is a digital variable frequency drive. It is supplied with a snap-in cradle and blank plate where an optional HMI can be installed. The blank plate should not be removed when the drive is under power and it is recommended to leave it in place until an HMI is installed. Menus on the drive are displayed in English. The 1336F-AQF30-AN-EN-HASB drive supports both AC and DC input voltage. The maximum rated drive output power is 3 Horsepower. The DC input voltage rating is 310 Volts DC and the AC input voltage range is 200 to 240 Volts AC. AC input overvoltage and undervoltage protection are supported with trip thresholds of 285 Volts and 138 Volts, respectively. The 1336F-AQF30-AN-EN-HASB drive also supports overvoltage and undervoltage protection for the DC bus and the trip thresholds are 405 Volts for overvoltage and 200 Volts for undervoltage.

The nominal voltage rating on the DC bus for the Allen-Bradley 1336F-AQF30-AN-EN-HASB 1336 PLUS II series variable frequency drive is 324 Volts DC. The 1336F-AQF30-AN-EN-HASB drive includes a heatsink for improved heat dissipation. The surface temperature of this heatsink is monitored by an on-board microprocessor which ensures that the drive will shut off immediately if the overtemperature threshold is exceeded. The maximum operation elevation that the drive can be installed at and operate at without derating is 1000 meters. The maximum operating temperature rating for the drive is 50 degrees Celsius and the maximum relative humidity rating is 95% without condensation. The 1336F-AQF30-AN-EN-HASB drive can handle shocks of up to 15 g for up to 11 milliseconds during operation. The drive can handle vibrations of 0.006 inches at 1 g peak. The drive housing is open and is IP 00 rated and the drive meets the CE, CSA, and UL standards.