The 1336F-AQF50-AN-EN-HAS1-LA2 is an AC drive from Allen-Bradley’s 1336 PLUS II series. This bulletin 1336 drive has constant and variable torque capabilities. It can control motors up to 5 Horsepower (4 kW) and 18 Amperes rating. The drive can be connected to 200 to 240 Volts AC or a 310 Volt DC voltage. It comes in an open (IP00) enclosure. Heat dissipation of the drive is 158 Watts. This module is programmed in the English language. The Allen-Bradley 1336F-AQF50-AN-EN-HAS1-LA2 is a user-friendly AC drive. It has already installed Programmer/Controller HMI with an analog potentiometer. The user can program the device over this interface, control its speed manually, or read-out alarms. It supports automatic fault reset. Its output frequency range is 0 to 400 Hertz programmed with 15-bit resolution.

This 1336 PLUS II AC drive is a powerful tool for 3-phase motor control, especially at low motor speeds. It utilizes open-loop sensorless vector control and Volts per Hertz algorithms for exceptional control. The special feature of this drive is isolated configurable inputs card (analog interface). This dual isolated input card is installed in slot A intended to be used for optional cards. It enables the user to connect two 0 to 10 Volt DC or 4 to 20 mA analog signals at TB2 terminal. The user is advised to place the drive at 0 to 40 degrees Celsius (32 to 104 degrees F) operating temperatures and to store it at -40 to 70 degrees Celsius temperatures. The total weight of the device is 85 pounds (38.6 kilograms). Its enclosure dimensions are 301.8 x 255 x 701 millimeters (11.88 x 8.86 x 27.60 inches). This drive is C-UL listed (U.S. and Canadian) and meets EN, IEC, and VDE standards.