1336F-AQF50-AN-EN-L4

The Allen-Bradley 1336F-AQF50-AN-EN-L4 1336 PLUS II series drive is an AC-powered adjustable frequency drive. It works with both AC and DC input voltage. The 1336F-AQF50-AN-EN-L4 drive can generate up to 5 Horsepower of output power but this is only possible with DC input voltage or with 3-phase AC input voltage. The AC input voltage range is from 200 to 240 Volts AC and the DC input voltage rating is 310 Volts DC. The open drive enclosure allows the 1336F-AQF50-AN-EN-L4 drive to operate at temperatures ranging from 32 to 122 degrees Fahrenheit. The altitude of the drive’s installation site should be between 0 and 1000 meters above sea level. The non-condensing relative humidity in the drive’s operating environment should be between 5 and 95% and the drive should not be installed in areas that contain volatile gasses, vapors, or dust. The 1336F-AQF50-AN-EN-L4 drive should also be protected from a corrosive atmosphere when in storage.

The storage temperature range for the Allen-Bradley 1336F-AQF50-AN-EN-L4 1336 PLUS II series adjustable frequency drive is from -40 to 158 degrees Fahrenheit. The drive can sustain a maximum of 15 g of shock for 11 milliseconds. The drive can also sustain a maximum of 0.152 millimeters of displacement at 1 g peak. The displacement power factor is 0.85 and it increases to 0.95 with an optional inductor. The drive’s maximum efficiency rating is 97.5% at the rated current and nominal line voltage.  The maximum short circuit rating is 200,000 Amps with specified fuses. Integrated short circuit protection is not supported and therefore an external fuse or circuit breaker needs to be used instead. The control interface on the drive is a TTL contact control interface. The 1336F-AQF50-AN-EN-L4 drive is designed for vertical mounting. It weighs approximately 6.71 kilograms and its dimensions are approximately 290 x 215 x 105.4 millimeters.