1336F-AQF50-AN-EN-L4E

The 1336F-AQF50-AN-EN-L4E drive is an Allen-Bradley 1336 PLUS II series adjustable frequency drive. It is capable of working with constant torque and with variable torque. The constant torque output power rating of the 1336F-AQF50-AN-EN-L4E drive is 5 Horsepower. The drive’s control interface supports TTL contact and encoder feedback options. The feedback feature allows the drive to receive information from the connected motor about its operating parameters such as its torque and speed ratings. The 1336F-AQF50-AN-EN-L4E drive also includes 2 slots for optional analog interfaces and these slots are labeled “Slot A” and “Slot B.” This drive does not have any built-in HMI modules, but several optional HMI modules are available if an HMI is required. The 1336F-AQF50-AN-EN-L4E drive is manufactured in an open enclosure with an IP 00 environmental protection rating.

The Allen-Bradley 1336F-AQF50-AN-EN-L4E 1336 PLUS II series adjustable frequency drive should be mounted inside a control cabinet for a higher degree of protection against common environmental contaminants than its IP 00 enclosure can provide. The frame size of the 1336F-AQF50-AN-EN-L4E drive is Size A3 and the nameplate for this drive is located on the bottom part of the chassis behind the drive’s cover. The minimum spacing requirements for proper heat dissipation for this drive are 4 inches between it and horizontally adjacent drives and 6 inches between it and vertically adjacent drives. The input voltage ratings are 200 to 240 Volts AC or 310 Volts DC. The 1336F-AQF50-AN-EN-L4E drive can be used on a circuit that is capable of delivering up to 200,000 symmetrical Amps and 600 Volts. To ensure the safety of the equipment and personnel, only recommended types line fuses should be used. Additionally, only trained personnel should handle, install, operate, and maintain the 1336F-AQF50-AN-EN-L4E drive.