The Allen-Bradley 1336F-B010-AA-EN-HASP drive is a variable speed drive that is a part of the 1336F Plus II family of AC drives. This drive controls the speed of 3-phase AC motors with the energy-optimized volts per hertz control mechanism, but its most advanced control mechanism is the sensorless vector torque and speed control mechanism. The 1336F-B010-AA-EN-HASP inverter drive has been designed to operate on a voltage range of 380 to 480 Volts AC. When supplied with 480 Volts AC voltage, this drive can reach an output power rating of 10 Horsepower. This motor speed controller drive has a modular design which allows for simple maintenance and printed circuit board and fan replacement. For easy operation and interaction with the drive, the users are provided with an HMI unit that allows for parameter changes and programming.

When not in use, the Allen Bradley 1336F-B010-AA-EN-HASP AC drive controller can be stored in environments that have a temperature between -40 and 70 degrees Celsius. As soon as the drive is powered up, this temperature range is reduced to 0 to 40 degrees Celsius. The drive supports an English language board, and its instruction manual is also written in English. The Allen-Bradley 1336F-B010-AA-EN-HASP drive is delivered with an IP 20 enclosure and all the internal parts of the drive are conformally coated to prolong the life of the whole device. The enclosure is specially designed to provide basic protection to the drive and at the same time to enable good heat transfer and the efficient cooling of the device. The drive can be installed in a simple manner by attaching it to a panel with 2 screws.