1336F-B015-AA-EN-GM1-HASP-L6

The Allen-Bradley 1336F-B015-AA-EN-GM1-HASP-L6 1336 PLUS II series adjustable frequency drive is a modern and advanced digital drive. It is available in an IP 20 rated industrial enclosure that provides it with a small amount of protection from dust but does not provide it with any protection against liquids. The frame size of the drive is Size A4. The weight of the drive is approximately 35 pounds and the dimensions of the drive housing are approximately 13.78 x 10.24 x 4.61 inches. The 1336F-B015-AA-EN-GM1-HASP-L6 drive is designed for industrial motor control applications. Note that several of the key parts of the drive are sensitive to electrostatic discharge. Therefore, all of the standard ESD precautions should be followed when handling or operating the drive. Additionally, only personnel that are familiar with 1336 PLUS II series drives should handle and install the 1336F-B015-AA-EN-GM1-HASP-L6 adjustable frequency drive.

Proper installation of the Allen-Bradley 1336F-B015-AA-EN-GM1-HASP-L6 1336 PLUS II series adjustable frequency drive will minimize the risk of component damage and extend the drive’s operating lifespan. Prior to any maintenance activity, the drive must be switched off and allowed to discharge completely to prevent electric shock. The 1336F-B015-AA-EN-GM1-HASP-L6 drive operates with AC input voltage ratings between 380 and 480 Volts AC. Note that the nominal output power rating of 15 Horsepower is only valid for 3-phase AC input voltage, 4 kilohertz of PWM carrier frequency, and all of the manufacturer’s specified ambient operating conditions. The 1336F-B015-AA-EN-GM1-HASP-L6 drive includes a single point Remote I/O communication module. Its HMI is a programmer-only type of HMI. The control interface on the 1336F-B015-AA-EN-GM1-HASP-L6 drive is rated at 115 Volts AC. The 1336F-B015-AA-EN-GM1-HASP-L6 drive operates best at ambient temperatures ranging from 0 to 40 degrees Celsius.