1336F-B015-AA-EN-HAS1-L5

The Allen-Bradley 1336F-B015-AA-EN-HAS1-L5 1336 PLUS II series adjustable frequency drive is an AC-powered motor control drive. It is designed to be installed vertically. An incorrectly installed or incorrectly applied drive can cause component damage or user injury. Application errors such as incorrect AC power supply or use of an undersized motor can also result in drive malfunctioning. To avoid these problems, the 1336F-B015-AA-EN-HAS1-L5 drive should be installed and serviced only by technicians who are familiar with 1336 PLUS II series drives and their associated equipment. Prior to working on the drive, all the bus capacitors should be discharged completely. This will help to ensure that the technicians working on the 1336F-B015-AA-EN-HAS1-L5 drive are safe from electric shock. The DC bus voltage can be measured at the terminals on Terminal Block 1 (TB1). This voltage rating should be 0 Volts DC. All relevant national and local electrical codes should be followed during the drive installation process.

The range of AC input voltage supported by the Allen-Bradley 1336F-B015-AA-EN-HAS1-L5 1336 PLUS II series adjustable frequency drive is from 380 to 480 Volts AC. This drive can operate with 3-phase or single-phase AC voltage. The drive output power rating with 3-phase AC input voltage is 15 Horsepower. The drive output power rating with single-phase AC input voltage is derated by 50%. The language supported by the drive’s HMI is English. The HMI includes an analog potentiometer and it is a programmer and controller HMI. The control interface on the 1336F-B015-AA-EN-HAS1-L5 is rated for 24 Volts AC/DC operating voltage. The NEMA enclosure of the 1336F-B015-AA-EN-HAS1-L5 drive has an environmental protection rating of IP 20. The maximum supported installation altitude of the 1336F-B015-AA-EN-HAS1-L5 adjustable frequency drive is 1000 meters above sea level for operation without derating.