Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B015-AA-EN-HAS1-L6

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B015-AA-EN-HAS1-L6

|
Need a Specific Revision?

The Allen-Bradley 1336F-B015-AA-EN-HAS1-L6 1336 PLUS II series adjustable frequency drive is an AC-powered motor control drive. The drive’s input voltage rating is 380 to 480 Volts AC. The nominal output power rating of the 1336F-B015-AA-EN-HAS1-L6 drive is 15 Horsepower.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B015-AA-EN-HAS1-L6

ManufacturerAllen Bradley
Product TypeAC Drive
Product Line1336 PLUS II Drives
Part Number1336F-B015-AA-EN-HAS1-L6
Weight50.00 lbs (22.68 kg)
Input Voltage380 to 480 Volts AC
Rated Output Power15 Horsepower
Mounting OrientationVertical
EnclosureNEMA
Protection RatingIP 20
Maximum Altitude1000 Meters
Operating Temperature0 to 40 degrees Celsius
Output Frequency0 to 400 Hertz
Request a Repair

The 1336F-B015-AA-EN-HAS1-L6 adjustable frequency drive is an Allen-Bradley drive from the 1336 PLUS II drive series. It is developed for industrial applications that require the precise and frictionless control of motor parameters such as speed and torque. The drive is designed for mounting in a vertical orientation only. The minimum mounting requirements for proper heat dissipation include 4 inches of horizontal space and 6 inches of vertical space between the drive and adjacent equipment. The input voltage range is from 380 to 480 Volts AC. Input power conditioning devices can be used to protect the 1336F-B015-AA-EN-HAS1-L6 drive from power fluctuations and other anomalies in the input supply. A fuse or circuit breaker can also be used to protect the drive from input side short-circuits. With 3-phase AC input voltage, the maximum output power rating supported by the 1336F-B015-AA-EN-HAS1-L6 adjustable frequency drive is 15 Horsepower. The drive should be properly grounded during installation.

The input power supply to the Allen-Bradley 1336F-B015-AA-EN-HAS1-L6 1336 PLUS II series adjustable frequency drive should be disconnected before any maintenance work is performed on the drive. The presence of residual voltages on the DC bus capacitors can cause electric shock. Therefore, sufficient time should be given to allow the DC bus capacitors to discharge completely. Measurement points are provided on the TB1 terminal block for measuring the DC bus voltage. The 1336F-B015-AA-EN-HAS1-L6 drive can be used on a circuit that is capable of delivering up to 200,000 RMS asymmetrical Amps and 600 Volts. The enclosure of the 1336F-B015-AA-EN-HAS1-L6 drive is IP 20 rated. The control interface on the 1336F-B015-AA-EN-HAS1-L6 drive is rated for 115 Volts AC voltage. The drive HMI is a programmer and controller type of HMI and it has an analog potentiometer. Only suitably trained and experienced professionals should install and operate the drive. All of the relevant safety instructions should be followed during drive installation, operation, and maintenance.