1336F-B015-AA-EN-HAS1-LA2-L4

The Allen-Bradley 1336F-B015-AA-EN-HAS1-LA2-L4 drive is a 1336 PLUS II series advanced adjustable frequency AC drive. It works with AC power supplies rated at 380 to 480 Volts AC. The input side of the drive can be protected from short circuits through an external fuse or circuit breaker. Additional power conditioning devices can also be used for the filtering of power system anomalies. The 1336F-B015-AA-EN-HAS1-LA2-L4 drive works with 3-phase or single-phase AC input voltage. Note that the full rated output power is only supported with 3-phase AC input. The output power derates by 50% with single-phase input. Control interfaces on the drive support a TTL contact option. The drive also supports optional analog interfaces, and an analog interface module that supports 2 isolated configurable inputs is installed on the drive. The HMI on the 1336F-B015-AA-EN-HAS1-LA2-L4 drive is a programmer/controller HMI with an analog potentiometer. The operating language supported by the drive is English.

The protection rating of the Allen-Bradley 1336F-B015-AA-EN-HAS1-LA2-L4 1336 PLUS II series adjustable frequency drive is IP 20 (NEMA Type 1). Allen-Bradley has designed the 1336F-B015-AA-EN-HAS1-LA2-L4 drive for vertical mounting. The cooling method that is used by the drive is convection cooling. This requires a smooth flow of air inside the cabinet and around the drive. Allen-Bradley recommends a minimum of 4 inches of horizontal spacing and a minimum of 6 inches of vertical spacing between adjacent drives in a system for air-cooling. The drive can be mounted with the heatsink inside or outside the cabinet. The total amount of heat dissipated during operation is 486 Watts. The temperature of the heatsink is monitored by an on-board microprocessor. The nominal output rating of the 1336F-B015-AA-EN-HAS1-LA2-L4 drive is 15 Horsepower. The drive supports constant torque and variable torque. The 1336F-B015-AA-EN-HAS1-LA2-L4 drive is UL listed. It is also certified by the CE standards.