1336F-B015-AA-EN-HAS2-L4

The Allen-Bradley 1336F-B015-AA-EN-HAS2-L4 1336 PLUS II series drive is an adjustable frequency drive. It is designed for industrial motor control applications. It can operate on a 3-phase AC power supply system with symmetrical line voltages. The drive features a surge suppression device for protection against lightning-induced voltages between the line and ground. Suitable isolation devices such as isolation transformers are required for situations where there is a potential for extremely high phase-to-ground voltages or where the supply ground can vary. The 1336F-B015-AA-EN-HAS2-L4 drive is equipped with a metal oxide varistor (MOV) for protection against voltage surges. Note that the MOV can only provide transient protection. The 1336F-B015-AA-EN-HAS2-L4 drive can be directly connected to an AC line with the proper voltage rating. Input power conditioning may be required if the AC line experiences voltage transients or outages.

The input voltage range supported by the Allen-Bradley 1336F-B015-AA-EN-HAS2-L4 1336 PLUS II series adjustable frequency drive is 380 to 480 Volts AC. The rated output power is 15 Horsepower or 11 kilowatts. The HMI on the drive operates in English. The HMI also includes a digital potentiometer and it is a programmer/controller type of HMI. The 1336F-B015-AA-EN-HAS2-L4 drive also supports a TTL contact control interface. The enclosure of the 1336F-B015-AA-EN-HAS2-L4 drive has an environmental protection rating of IP 20. This protection rating indicates that the enclosure provides a small amount of protection against solid particles like dust that have dimensions of about 12 millimeters. For a higher degree of protection against dust and against liquids, the 1336F-B015-AA-EN-HAS2-L4 drive can be installed inside a control cabinet. The weight of the drive is approximately 35 pounds and the approximate drive dimensions are 350 x 260 x 117 millimeters. Only trained technicians should handle, install, operate, and service the drive.