1336F-B015-AA-EN-HAS2-L6E

The Allen-Bradley 1336F-B015-AA-EN-HAS2-L6E drive is a digital 1336 PLUS II series adjustable frequency drive. It is designed to operate with a power supply that is rated at 380 to 480 Volts AC. Input line conditioning for the drive is only required if the supply system experiences frequent outages or line transients. A suitable fuse or circuit breaker is required for input short-circuit protection. A circuit breaker with maximum rating of 150 Amps can be used. Depending on the type of fuse used, the maximum and minimum current ratings are 100 Amps and 35 Amps, respectively. A protection device rated for 50 Amps can also be used at the output of the 1336F-B015-AA-EN-HAS2-L6E  drive. The input and output current ratings for the continuous torque mode are 25 Amps and 24.2 Amps, respectively, and the output power rating for the continuous torque mode is 15 Horsepower. The input and output current ratings for the variable torque mode are 28 Amps and 27 Amps, respectively, and the output power rating for the variable torque mode is 20 Horsepower.

The start/stop circuitry on the Allen-Bradley 1336F-B015-AA-EN-HAS2-L6E 1336 PLUS II series adjustable frequency drive includes solid-state components. Additional hardwired stop circuits may be required if hazards such as unintentional flow of gas or accidental contact with moving machinery are likely to occur in the drive’s operating environment. The 1336F-B015-AA-EN-HAS2-L6E drive should not be used with a device that repeatedly disconnects and reapplies power to the drive. The 1336F-B015-AA-EN-HAS2-L6E drive includes a control interface that supports encoder feedback and is rated to operate at 115 Volts AC. The HMI on the drive is a programmer/controller HMI with a digital potentiometer. The protective housing of the 1336F-B015-AA-EN-HAS2-L6E drive is IP 20 rated. For safety reasons, the installation and operation of the 1336F-B015-AA-EN-HAS2-L6E adjustable frequency drive should only be performed by suitably trained personnel.