Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B015-AE-EN-GM1-HASB

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B015-AE-EN-GM1-HASB

|
Need a Specific Revision?

The Allen-Bradley 1336F-B015-AE-EN-GM1-HASB drive is a 1336 PLUS II series adjustable frequency drive. It does not include an integrated HMI. The maximum rated output power of the 1336F-B015-AE-EN-GM1-HASB drive is 15 Horsepower.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B015-AE-EN-GM1-HASB

ManufacturerAllen Bradley
Product TypeAdjustable Frequency Drive
Product Line1336 PLUS II Drives
Part Number1336F-B015-AE-EN-GM1-HASB
Weight50.00 lbs (22.68 kg)
Input Voltage380 to 480 Volts AC
Rated Output Power15 Horsepower
EnclosureNEMA Type 1
Protection RatingIP 20
EMC CompatibleYes
Maximum Altitude1000 Meters
Maximum Relative Humidity95%
Maximum Operating Temperature40 degrees Celsius
Request a Repair

The Allen-Bradley 1336F-B015-AE-EN-GM1-HASB drive is an adjustable frequency drive from the 1336 PLUS II series. The drive does not include a snap-in HMI. Instead, the drive features a blank plate that must be left in place to cover the opening for an HMI in the front cover of the enclosure. Equipment damage or personal injury may occur if the blank plate is removed because live parts of the drive will be exposed if the plate or an HMI is not installed. Additionally, dust and moisture could enter the opening and damage the drive if it is not properly covered. A variety of snap-in HMI modules that can be ordered and installed on this drive to make it easier to program and control. The 1336F-B015-AE-EN-GM1-HASB drive comes with a built-in single-point remote I/O communication interface for communicating with other devices. The 1336F-B015-AE-EN-GM1-HASB adjustable frequency drive is designed to operate with 380 to 480 Volts AC of input voltage. It delivers up to 15 Horsepower of output in the constant torque operating mode.

When operating in the variable torque mode, the Allen-Bradley 1336F-B015-AE-EN-GM1-HASB 1336 PLUS II series adjustable frequency drive delivers up to 20 Horsepower of output. The NEMA enclosure of the drive is EMC compatible and it is IP 20 rated. For an improved degree of environmental protection, Allen-Bradley recommends mounting the drive in an industrial control cabinet. The 1336F-B015-AE-EN-GM1-HASB drive is meant to be vertically mounted. The convection cooling method that the drive uses requires smooth flow of air around the drive as it operates. As a result, Allen-Bradley recommends a minimum of 4 inches of horizontal spacing and a minimum of 6 inches of vertical spacing between adjacent drives in the same system for airflow. Lack of proper spacing between nearby devices leads to obstructed airflow and causes the ambient temperature to increase. The 1336F-B015-AE-EN-GM1-HASB drive performs optimally when the temperature of the surrounding air is between 0 and 40 degrees Celsius. Higher ambient temperatures will lead to output derating and to component damage.