Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B015-AE-EN-GMS5

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B015-AE-EN-GMS5

|

The Allen-Bradley 1336F-B015-AE-EN-GMS5 drive is a 1336 PLUS II series AC-powered adjustable frequency drive. It supports DeviceNet communication with other devices. The 1336F-B015-AE-EN-GMS5 drive is available in an IP 20 rated enclosure for protection.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B015-AE-EN-GMS5

ManufacturerAllen Bradley
Product TypeAdjustable Frequency Drive
Product Line1336 PLUS II Drives
Part Number1336F-B015-AE-EN-GMS5
Weight50.00 lbs (22.68 kg)
Input Voltage380 to 480 Volts AC
Rated Output Power15 Horsepower
EnclosureNEMA Type 1
Protection RatingIP 20
EMC CompatibilityYes
Communication OptionDeviceNet
Maximum Altitude1000 Meters (3300 Feet)
Maximum Operating Temperature40 degrees Celsius

The Allen-Bradley 1336F-B015-AE-EN-GMS5 1336 PLUS II series adjustable frequency drive is a digital AC drive that supports variable output frequency and operates in English. The drive features a DeviceNet communication module, and the DeviceNet protocol is the communication protocol that is used for connecting this drive with other control or automation devices in a complete industrial automation system. The media layer that is used by the DeviceNet network is the Common Industrial Protocol that it accesses over a Controller Area Network. The protective housing or enclosure of the 1336F-B015-AE-EN-GMS5 is IP 20 rated and it can protect the drive from small amounts of dust and the users from electric shock. This drive weighs approximately 35 pounds and its enclosure is compliant with the EMC regulations. The rated output power of the 1336F-B015-AE-EN-GMS5 adjustable frequency drive is 15 Horsepower.

The Allen-Bradley 1336F-B015-AE-EN-GMS5 1336 PLUS II series adjustable frequency drive’s input voltage rating is 380 to 480 Volts AC. The drive heatsink can be mounted inside or outside the control cabinet when the drive is mounted in a cabinet. The temperature of the heatsink is monitored and the drive trips if the temperature exceeds its predefined limits. The 1336F-B015-AE-EN-GMS5 drive is a convection-cooled drive. For proper heat dissipation, the drive should be installed with 4 inches of horizontal spacing and 6 inches of vertical spacing between it and adjacent devices. The recommended ambient temperature range for safe drive operation is from 0 to 40 degrees Celsius. The output of the 1336F-B015-AE-EN-GMS5 derates if the ambient temperature is outside this recommended range. The drive output also derates if the altitude of the installation site exceeds 1000 meters or 3300 feet above sea level. The recommended non-condensing relative humidity levels in the vicinity of the drive should be between 5 and 95%.