Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B015-AE-EN-HAS2-L5

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B015-AE-EN-HAS2-L5

|
Need a Specific Revision?

The 1336F-B015-AE-EN-HAS2-L5 adjustable frequency drive is a member of the Allen-Bradley/Rockwell Automation 1336 PLUS II drive series. It runs on 380 to 480 Volts AC input voltage, and it has a Horsepower output rating of 15 Horsepower. The 1336F-B015-AE-EN-HAS2-L5 drive is enclosed in IP 20 NEMA 1/EMC enclosure for protection.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B015-AE-EN-HAS2-L5

ManufacturerAllen Bradley
CategoryDrives
Product Line1336 PLUS II Drives
Part Number1336F-B015-AE-EN-HAS2-L5
Weight50.00 lbs (22.68 kg)
Voltage380 to 480V AC
Nominal HP Rating15 HP
FrameF Frame
Enclosure TypeIP 20 (NEMA 1)/EMC
Operating Temperature32 to 104 Degrees Fahrenheit
Storage Temperature-40 to 158 Degrees Fahrenheit
Relative Humidity5 to 95 Percent (Non-Condensing)
HMIProgrammer/Controller with Digital Potentiometer
Control Interface Option24V AC/DC
Request a Repair

The Allen-Bradley 1336F-B015-AE-EN-HAS2-L5 drive is a sensorless vector control 1336 PLUS II series adjustable frequency drive. This drive features overcurrent stall protection, fault reset input protection, 6 drive alarms, and an overcurrent stall detection/trip functionality. It runs on an input voltage range of 380 to 480 Volts AC, with a nominal output power rating of 11 kilowatts or 15 Horsepower. The 1336F-B015-AE-EN-HAS2-L5 drive is enclosed in an IP 20 NEMA Type 1 or EMC enclosure and it is suitable for use at an ambient operating temperature range of 32 to 104 degrees Fahrenheit. The storage temperature range of the drive is from -40 to 158 degrees Fahrenheit and it supports a non-condensing relative humidity range of 5 to 95 percent in both operation and storage. Other protective features of the 1336F-B015-AE-EN-HAS2-L5 drive include a power ride-thru time of up to 15 milliseconds at a full load and logic control ride-thru time of 0.5 seconds minimum and 2 seconds typical.

The Allen-Bradley 1336F-B015-AE-EN-HAS2-L5 1336 PLUS II series adjustable frequency drive supports a voltage tolerance of -10 percent minimum and 10 percent maximum. It also has a frequency tolerance range of 48 to 62 Hertz, and it can operate at full power with 3-phase AC input voltage. Additionally, it supports a maximum efficiency rating of up to 97.5 percent at the rated current for the nominal line voltage. The 1336F-B015-AE-EN-HAS2-L5 drive is rated for a maximum short circuit current rating of 200,000 Amps RMS symmetrical at 600 Volts, particularly when the drive is used with AC line fuses. The standard displacement power factor for the 1336F-B015-AE-EN-HAS2-L5 drive is 0.95. The additional optional functions and features that are supported by this drive include a programmer and controller type of HMI or human-machine interface module with a digital potentiometer, and a control interface that is rated at 24 Volts AC/DC.