1336F-B015-AE-EN-L4-MX3

The Allen-Bradley/Rockwell Automation 1336F-B015-AE-EN-L4-MX3 adjustable frequency drive is a motor control drive from the Allen-Bradley 1336 PLUS II series. This drive does not include a human-machine interface but it does come with a control interface that enables it to interact with different equipment that is installed in the same application system. This drive specifically comes with a TTL contact type of control interface. The drive does not include an analog interface. The 1336F-B015-AE-EN-L4-MX3 adjustable frequency drive comes with a NEMA Type 1 or IP 20 rated enclosure that provides it with electromagnetic interference or EMC protection. This enclosure also protects the drive against dust and small solid particles, and the drive has a conformal coating on its circuit board. However, the 1336F-B015-AE-EN-L4-MX3 adjustable frequency drive still needs to be included in a grounding system for additional protection and used in a controlled environment where it can operate safely without coming into contact with corrosive chemicals or materials.

To install The Allen-Bradley/Rockwell Automation 1336F-B015-AE-EN-L4-MX3 1336 PLUS II series adjustable frequency drive, the users must mount it in a vertical position, leaving clearances of approximately 5 to 6 inches on each side to promote ventilation. This drive must not be mounted on a combustible surface unless spacers are provided under the drive for airflow. This drive can be installed in a cabinet to protect it from moisture and large amounts of dust. The 1336F-B015-AE-EN-L4-MX3 adjustable frequency drive operates with an input voltage range of 380 to 480 Volts AC and a frequency range of 47 to 63 Hertz. The drive also supports an output power rating of 15 Horsepower. These specifications all need to be taken into account when selecting a compatible motor for the drive to control. The 1336F-B015-AE-EN-L4-MX3 adjustable frequency drive can operate at 0 to 40 degrees Celsius and 5 to 95% non-condensing relative humidity.