1336F-B015-AN-EN-GMS1-L4

The Allen-Bradley 1336F-B015-AN-EN-GMS1-L4 drive is a 1336 PLUS II series adjustable frequency drive. It is designed for direct connection to AC mains that can support an input voltage range of 380 to 480 Volts AC. Devices for input power conditioning such as isolation transformers or line reactors may be required in cases where the AC supply will experience power outages or transients. Allen-Bradley recommends use of a 5% line reactor or isolation transformer if the AC line has capacitors for power correction that switch in and out. The 1336F-B015-AN-EN-GMS1-L4 drive is not supplied with integrated short-circuit protection but a suitably rated fuse or circuit breaker can be installed at the input side of the drive for protection. The compatible ratings for the fuse and circuit breakers that this drive needs are specified in its instruction manual.

The constant torque ratings for the Allen-Bradley 1336F-B015-AN-EN-GMS1-L4 1336 PLUS II series adjustable frequency drive include 15 Horsepower of output, 25 Amps of rated input current, and 24.2 Amps of rated output current. The variable torque ratings for the drive include 20 Horsepower of output, 28 Amps of input current, and 28 Amps of output current. The start/stop circuitry on the 1336F-B015-AN-EN-GMS1-L4 drive includes solid-state components. This drive is designed to be used with control input signals for starting and stopping, and the use of devices that routinely remove and then apply power to this drive is not recommended. The 1336F-B015-AN-EN-GMS1-L4 drive is available in an open enclosure that belongs to the IP 00 protection class. The ambient temperature range of the drive is from 0 to 50 degrees Celsius. The 1336F-B015-AN-EN-GMS1-L4 drive features a single-point Remote I/O module with a snap-in cradle for communication. It also supports a TTL contact control interface. The approximate shipping weight of the drive is 35 pounds.