1336F-B015-AN-EN-HCS2-LA4-L6

The 1336F-B015-AN-EN-HCS2-LA4-L6 drive is an adjustable frequency drive that has been designed by Allen-Bradley/Rockwell Automation as a member of the 1336 PLUS II series of Allen-Bradley adjustable frequency drives. This drive is specially designed to operate at an input voltage range of 380 to 480 Volts AC and at a frequency range of 50 to 60 Hertz. The Horsepower output power rating of the drive is 15 Horsepower. The ratings of the drive need to be compared to the corresponding ratings of the motor that the drive is intended to control in order to ensure that both pieces of equipment are compatible and that they can operate without any errors. This drive does not include a communication module, but it does come with a human-machine interface, a control interface, and an analog interface. The 1336F-B015-AN-EN-HCS2-LA4-L6 adjustable frequency drive’s human-machine interface is a programmer and controller type of human-machine interface that comes with a digital potentiometer and which can send and receive data.

The Allen-Bradley/Rockwell Automation 1336F-B015-AN-EN-HCS2-LA4-L6 1336 PLUS II series adjustable frequency drive comes with an open IP 00 rated enclosure that provides it with a mounting mechanism and at the same time enables it to operate at temperatures of up to 122 degrees Fahrenheit or 50 degrees Celsius. This drive can operate at a maximum altitude of 1000 meters above sea level at full power. If it needs to operate at a higher altitude, the drive will need to have its output derated. The 1336F-B015-AN-EN-HCS2-LA4-L6 adjustable frequency drive can operate with 3 skip frequencies, 7 preset speeds, a proactive current limit, a flying start, and a dynamic braking function. The drive has easy-to-set parameters. The 1336F-B015-AN-EN-HCS2-LA4-L6 adjustable frequency drive also comes with 6 different alarms for different kinds of faults and it supports 4 status indicators that are located on the drive's main control board.