1336F-B020-AA-EN-GM1-HAS2-L6

The Allen-Bradley 1336F-B020-AA-EN-GM1-HAS2-L6 adjustable frequency drive is a 1336 PLUS II series AC-powered digital drive. Its input voltage range is 380 to 480 Volts AC with +/-10% tolerance. The 1336F-B020-AA-EN-GM1-HAS2-L6 drive can operate in both constant torque and variable torque modes. The nominal output rating for the constant torque mode is 20 Horsepower (15 kilowatts). The nominal output rating for the variable torque mode is 25 Horsepower. Additionally, the input current and power ratings for the constant torque mode are 32 Amps and 21 to 26 kVA, respectively, and the output current and power ratings are 31 Amps and 25 kVA, respectively. The input current and power ratings for the variable torque mode are 35 Amps and 29 kVA, respectively, and the output current and power ratings for the constant torque mode are 34 Amps and 27 kVA, respectively. A heatsink is attached to the 1336F-B020-AA-EN-GM1-HAS2-L6 drive to help it dissipate heat.

The Allen-Bradley 1336F-B020-AA-EN-GM1-HAS2-L6 1336 PLUS II series adjustable frequency drive can be mounted with the heatsink either inside or outside the cabinet. The heat dissipation rating of the drive is 140 Watts, the heat dissipation rating of the heat sink is 628 Watts, and the total heat dissipation rating is 768 Watts. This information can be used to determine the size of the cabinet used for drive mounting, and to decide the best location for the heat sink. The cooling method employed by the 1336F-B020-AA-EN-GM1-HAS2-L6 drive is convection cooling. To facilitate airflow, adjacent drives in a system should be separated by 4 inches horizontally and 6 inches vertically. The ambient operating temperature range for the drive is from 0 to 40 degrees Celsius. The control interface on the 1336F-B020-AA-EN-GM1-HAS2-L6 drive is rated for 115 Volts AC. The HMI on the drive is a programmer/controller HMI with a digital potentiometer. The drive supports Remote I/O communication through a single channel.