1336F-B020-AA-EN-GM1-HASB-L6

The Allen-Bradley 1336F-B020-AA-EN-GM1-HASB-L6 adjustable frequency drive is a digital drive with advanced microprocessor technology. This 1336 PLUS II series drive controls the speed and torque of compatible Allen-Bradley motors. The maximum output power rating of this drive is 20 Horsepower. The input current rating of the drive is 32 Amps and the output current is 31 Amps. It supports motor protection devices rated for 50 Amps at its output. Additionally, the maximum input fuse rating for dual-element time delay fuses is 70 Amps and the maximum input circuit breaker rating is 125 Amps for this drive. The 1336F-B020-AA-EN-GM1-HASB-L6 drive is supplied with a snap-in blank plate to cover the area where an HMI module can be installed. This blank plate must not be removed when the drive is under power, and it should be kept in place unless an HMI is installed to protect the live parts of the drive. The communication module installed on the 1336F-B020-AA-EN-GM1-HASB-L6 drive supports single-point remote I/O communication.

The Allen-Bradley 1336F-B020-AA-EN-GM1-HASB-L6 1336 PLUS II series adjustable frequency drive can operate at 380 to 480 Volts AC of rated input voltage. The tolerable frequency range for the drive is from 47 to 63 Hertz. If  the 1336F-B020-AA-EN-GM1-HASB-L6 drive is used with 3-phase AC voltage systems, it can deliver its full rated output. If it is used with single-phase AC voltage systems instead, the drive will only deliver 50% of its full rated output. The drive’s control interface is rated for 115 Volts AC. The enclosure of the 1336F-B020-AA-EN-GM1-HASB-L6 drive is a NEMA Type 1 enclosure and the protection rating of the drive’s enclosure is IP 20. The 1336F-B020-AA-EN-GM1-HASB-L6 adjustable frequency drive supports multiple motor control algorithms such as the Volts per Hertz control, sensorless vector control, and the sine-coded pulse width modulation control algorithms. The drive weighs about 50 pounds.