1336F-B020-AA-EN-GM6-L4

The 1336F-B020-AA-EN-GM6-L4 adjustable frequency drive is a 1336 PLUS II series motor control drive from Allen-Bradley. The input specifications for the drive include 380 to 480 Volts AC of rated input voltage, a 570 Volts AC overvoltage trip threshold, and a 280 Volts AC undervoltage trip threshold. The nominal bus voltage rating is 648 Volts DC, the bus overvoltage trip threshold is 810 Volts DC, and the bus undervoltage trip threshold is 400 Volts DC. To prevent user injury and minimize risk of death from electric shock, the 1336F-B020-AA-EN-GM6-L4 drive must be powered off prior to any maintenance activity. Furthermore, sufficient time should be given to allow the bus capacitors to discharge fully. The DC bus voltage rating should be zero when it is measured at the specified test points on terminal block 1 (TB1) of the 1336F-B020-AA-EN-GM6-L4 adjustable frequency drive.

The Allen-Bradley 1336F-B020-AA-EN-GM6-L4 1336 PLUS II series adjustable frequency drive does not feature a built-in HMI. However, Allen-Bradley provides a wide range of HMI modules for 1336 PLUS II series drives that can be ordered separately for special applications. The communication module installed on the 1336F-B020-AA-EN-GM6-L4 drive supports the enhanced DeviceNet communication network. The control interface on the drive is a TTL contact control interface. The 1336F-B020-AA-EN-GM6-L4 drive can operate in a constant torque mode or a variable torque mode. Its nominal output ratings are 20 Horsepower with constant torque and 25 Horsepower with variable torque. The drive enclosure has an IP 20 protection rating. This type of enclosure does not provide a high degree of protection against dust or moisture. For improved protection, the 1336F-B020-AA-EN-GM6-L4 drive needs to be mounted inside a suitable industrial cabinet. The heatsink on the drive can be mounted inside or outside the cabinet. The approximate shipping weight of the drive is 50 pounds.