1336F-B020-AA-EN-GMS1-L4

The Allen-Bradley 1336F-B020-AA-EN-GMS1-L4 adjustable frequency drive is a microprocessor-based 1336 PLUS II series digital drive. It features many protective devices that can detect errors and trip the drive to protect it from overvoltage, undervoltage, overcurrent, over-temperature, and ground fault situations as well as 6 drive alarms and a fault reset input option. Other special functions include the auto economizer, auto-tuning, step logic, and traverse functions. The programmable features on the 1336F-B020-AA-EN-GMS1-L4 drive include dynamic braking, a flying start, a line loss restart mode, slip compensation, and a DC injection brake. The 1336F-B020-AA-EN-GMS1-L4 drive is available in a compact enclosure that helps to conserve space and protect the drive from small amounts of dust. The drive’s design has been infra-red tested for minimization of hot spots and for maximum reliability. Four LED status indicators are located on the control board.

The Allen-Bradley 1336F-B020-AA-EN-GMS1-L4 1336 PLUS II series adjustable frequency drive also includes a slot for installing an HMI module. However, an integrated HMI is not available on the 1336F-B020-AA-EN-GMS1-L4 drive. The drive operates at 380 to 480 Volts AC input input voltage and it delivers 20 Horsepower of maximum output power under ideal operating conditions. The enclosure of the drive is a NEMA Type 1 enclosure with an environmental protection rating of IP 20. The cooling method employed for heat dissipation on the drive is natural convection cooling and the working temperature range is from 0 to 40 degrees Celsius. The 1336F-B020-AA-EN-GMS1-L4 drive supports single-point Remote I/O communication through a communication interface with 1 channel. The drive also includes a TTL contact control interface. Reliable drive operation is dependent on proper installation, and the drive and its associated machinery should only be installed by properly trained technicians.