Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B020-AA-EN-HASP-L6

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B020-AA-EN-HASP-L6

|

The Allen-Bradley 1336F-B020-AA-EN-HASP-L6 drive is an adjustable frequency drive from the 1336 PLUS II series. It is available in an IP 20 rated NEMA Type 1 enclosure. The maximum rated output of the 1336F-B020-AA-EN-HASP-L6 drive is 20 Horsepower.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B020-AA-EN-HASP-L6

ManufacturerAllen Bradley
Product TypeAC Drive
Product Line1336 PLUS II Drives
Part Number1336F-B020-AA-EN-HASP-L6
Weight50.00 lbs (22.68 kg)
Input Voltage380 to 480 Volts AC
Rated Output Power20 Horsepower
Mounting OrientationVertical
Frame SizeB
Enclosure TypeNEMA Type 1
Protection RatingIP 20
Maximum Altitude1000 Meters (3300 Feet)
Maximum Operating Temperature40 degrees Celsius

The 1336F-B020-AA-EN-HASP-L6 adjustable frequency drive is an industrial drive from Allen-Bradley. It is part of the Allen-Bradley 1336 PLUS II series and it operates with 380 to 480 Volts AC 3-phase input voltage. The 1336F-B020-AA-EN-HASP-L6 drive is designed to operate in AC systems with symmetrical line voltages. Integrated surge suppression devices provide protection against overvoltages that are induced by lightning. Suitable isolation on the input side of the drive may be required if there are chances of abnormally high input voltages or variations in the ground potential. A MOV circuit on the 1336F-B020-AA-EN-HASP-L6 drive provides surge suppression against transients and the drive is designed for direct connection to the AC mains. However, if there are frequent power outages or voltage transients, then a suitable isolation transformer or line reactor can be used. Input fusing or a circuit breaker can also be used to provide input current protection.

The Allen-Bradley 1336F-B020-AA-EN-HASP-L6 1336 PLUS II series adjustable frequency drive’s output depends on the PWM carrier frequency and ambient conditions of the drive. The drive ratings specified in the product manual are valid for 4 kilohertz of PWM frequency. The ambient conditions specified by Allen-Bradley include an ambient temperature range of 0 to 40 degrees Celsius, a maximum installation altitude of 1000 meters, and an ambient non-condensing relative humidity range between 5 and 95%. The 1336F-B020-AA-EN-HASP-L6 drive is rated for 20 Horsepower of maximum output. Ambient conditions that are different from the specified ambient conditions can cause output derating or component damage. Using the drive with single-phase AC power sources derates the output ratings by 50%. The 1336F-B020-AA-EN-HASP-L6 drive comes in an IP 20 rated NEMA Type 1 enclosure. The drive includes a HMI with programmer functions and a control interface that is rated at 115 Volts AC. To minimize installation errors and ensure reliable drive operation, only trained personnel should install the drive.