The 1336F-B020-AA-EN-HCS1-L4 adjustable frequency drive is an Allen-Bradley 1336 PLUS II series motor control drive. It is used to control compatible Allen-Bradley industrial motors. Terminal block TB1 on the drive contains power wiring connections points for the AC input, protective ground, drive to motor output, and the DC bus voltage test points. The connection points for digital outputs are located on terminal block TB2 and the connection points for digital inputs are located on terminal block TB3. The frame size of the 1336F-B020-AA-EN-HCS1-L4 drive is Size B. The jumpers for the drive are located on the main control board and the connection points for analog I/O are located on terminal block TB2. The AC line power must be verified prior to starting up the drive and it should match the drive rating. When the input power is applied, the LCD screen on the drive lights up and it displays a drive status message that says “stopped.”

The Allen-Bradley 1336F-B020-AA-EN-HCS1-L4 1336 PLUS II series adjustable frequency drive is supplied with an HMI. The integrated HMI features include programmer functions, an analog potentiometer, and support for file uploads and downloads. Parameter programming or viewing are supported by the program mode and display mode, respectively. The operating voltage range for the 1336F-B020-AA-EN-HCS1-L4 drive is from 380 to 480 Volts AC. The maximum operating output power rating of the 1336F-B020-AA-EN-HCS1-L4 drive is 20 Horsepower or 15 kilowatts. The 1336F-B020-AA-EN-HCS1-L4 adjustable frequency drive is supplied with an IP 20 rated NEMA Type 1 enclosure for protection and it has a TTL contact type of control interface. The operating temperature range for this drive is 0 to 40 degrees Celsius or 32 to 104 degrees Fahrenheit, and the operating altitude range is 0 to 1000 meters or 0 to 3300 feet above sea level.