1336F-B020-AA-EN-HCS1-L5E

The Allen-Bradley 1336F-B020-AA-EN-HCS1-L5E drive is a digital adjustable frequency drive from the 1336 PLUS II series. The HMI module installed on this drive makes it easy to program and control. This HMI is located on the drive’s front panel and it operates in English. The 1336F-B020-AA-EN-HCS1-L5E drive is typically used for AC motor control in a variety of industrial commercial applications. Note that its components are sensitive to ESD and that all of the standard ESD precautions should be followed during any installation or maintenance-related activity on the drive. The 1336F-B020-AA-EN-HCS1-L5E adjustable frequency drive supports a control interface with encoder feedback and with a voltage rating of 24 Volts AC/DC.

The Allen-Bradley 1336F-B020-AA-EN-HCS1-L5E 1336 PLUS II series adjustable frequency drive is a drive that can be directly connected to an AC voltage source with an input voltages range from 380 to 480 Volts AC. To prevent damage from voltage variations or transients, suitable isolation devices can be installed at the drive’s input. The nominal output power rating of the 1336F-B020-AA-EN-HCS1-L5E drive is 20 Horsepower. The 1336F-B020-AA-EN-HCS1-L5E drive is meant to be mounted vertically and it weighs about 50 pounds. It comes in a NEMA Type 1 enclosure with an IP 20 environmental protection rating. To provide the 1336F-B020-AA-EN-HCS1-L5E drive with additional protection from dust and moisture, the drive needs to be mounted inside a suitable cabinet. The minimum spacing requirements for proper heat dissipation for this drive are 4 inches of minimum horizontal spacing and 6 inches of minimum vertical spacing. To minimize installation errors, only trained personnel should install the 1336F-B020-AA-EN-HCS1-L5E drive.