1336F-B020-AE-EN-HCSP-L5

The Allen-Bradley/Rockwell Automation 1336F-B020-AE-EN-HCSP-L5 variable frequency drive is part of the 1336 PLUS II drive series and it is compatible with many different Allen-Bradley/Rockwell Automation industrial system components. Before starting the drive, the users must connect it to a grounding system to prevent electromagnetic interference from affecting the quality of the drive’s signals. This drive needs to be installed vertically and clearances need to be left on each side of it to promote ventilation and air-cooling. The maximum ambient temperature around the drive must not exceed 40 degrees Celsius. The Allen-Bradley/Rockwell Automation 1336F-B020-AE-EN-HCSP-L5 variable frequency drive includes a human-machine interface which is a programmer and controller interface with a digital potentiometer. This snap-in human-machine interface module is easy to install and easy to remove and it enables the module to be programmed locally without requiring any additional equipment. This human-machine interface module can also upload and download data, which enables the drive to send and receive data between with other devices and pieces of equipment.

The Allen-Bradley/Rockwell Automation 1336F-B020-AE-EN-HCSP-L5 1336 PLUS II series variable frequency drive is compact, and this helps it to conserve valuable installation panel space. Its design also includes a planer construction and a laminar bus design that eliminate several of the internal cables and connectors that are regularly used in this type of equipment. This in turn increases the drive’s reliability and reduces its internal inductance, thereby reducing snubber losses and improving the drive’s IGBT performance. The Allen-Bradley/Rockwell Automation 1336F-B020-AE-EN-HCSP-L5 variable frequency drive supports over-voltage protection, drive overcurrent protection, over-temperature protection, load loss protection, ground fault protection, and drive output short protection. This drive supports a standard selectable Volts per Hertz control mode and a more advanced sensorless vector control mode. It also supports 3 skip frequencies, dual acceleration and deceleration profiles, and 7 preset speeds.