Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B020-AJ-EN-L4

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B020-AJ-EN-L4

|
Need a Specific Revision?

The Allen Bradley 1336F-B020-AJ-EN-L4 is an AC variable frequency drive for reliable application performance. This drive supports a three-phase input voltage range of 380-480V AC and delivers 20 HP (15 kW) output power for continuous operation.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B020-AJ-EN-L4

ManufacturerAllen Bradley
Product TypeAC Variable Frequency Drive
Product Line1336 PLUS II Drives
Part Number1336F-B020-AJ-EN-L4
Weight85.00 lbs (38.56 kg)
Overvoltage ProtectionTrips at 570V AC Input / 810V DC Bus
Undervoltage ProtectionTrips Below 280V AC Input / 400V DC Bus
Overcurrent Limit (Hardware)180-250% of Rated Current (Variable Torque Basis)
Short-Circuit ProtectionPhase-to-Phase or Phase-to-Ground Trip on Drive Output
Voltage Rating380-480V AC Input, Three-Phase
Output Power (Constant Torque)20 HP (15 kW) Continuous Duty
Output Current31 Amps at Rated Load
Enclosure ProtectionNEMA Type 12 / IP54 (Dust-Resistant, Water-Splash Proof for Industrial Use)
Ambient Temperature Range0-40°C (32-104°F) for NEMA Type 12 Enclosure
Control MethodSensorless Vector PWM with Programmable Carrier Frequency (2-8 kHz for B Frame)
Efficiency97.5% at Rated Load and Nominal Voltage
Communication InterfacesSupports DeviceNet, Remote I/O, RS232/422/485 Protocols (Optional Modules Required)
Dynamic Brake CompatibilityCompatible with External Brake Chopper Kits (e.g., -WB035 for 11-37 kW Range)
Motor Control FeaturesProgrammable PI Control, Auto-Tuning, 150% Overload Capacity for 1 Minute (CT Mode)
Request a Repair

The 1336F-B020-AJ-EN-L4 model from Allen Bradley represents a robust AC variable frequency drive. Engineered to operate within a three-phase voltage range of 380-480V AC, this unit offers a constant torque output power of 20 horsepower (15 kW) for continuous duty. It manages an output current of 31 Amps during rated loads. Designed with industrial environments in mind, the drive carries a NEMA Type 12/IP54 rating, providing substantial protection against dust and water splashes.

Advanced protective features include overvoltage and undervoltage protections, which trigger trip responses at 570V AC and 280V AC input levels, respectively. Additionally, the hardware overcurrent limit is set to manage between 180% and 250% of the rated current based on variable torque applications. Short-circuit protection is enabled for both phase-to-phase and phase-to-ground trips at the output, ensuring enhanced safety during operation.

For ambient conditions, this drive operates efficiently within a temperature range of 0 to 40°C (32-104°F) when considering NEMA Type 12 enclosures. The control method is conducted through sensorless vector PWM technology, allowing for programmable carrier frequencies in the 2-8 kHz range for B Frames. The drive also boasts an impressive efficiency rating of 97.5% at its rated load and nominal voltage.

Furthermore, communication capabilities are extensive, supporting DeviceNet, Remote I/O, and RS232/422/485 protocols with the addition of optional modules. To enhance dynamic performance, it is compatible with external brake chopper kits (e.g., -WB035 for 11-37 kW ranges). Motor control features include programmable PI control, auto-tuning, and a 150% overload capacity for one minute in constant torque mode, allowing for precise regulation and reliable operation.