1336F-B020-AN-EN-GM1-HAS1-L4

The Allen-Bradley 1336F-B020-AN-EN-GM1-HAS1-L4 drive is a 1336 PLUS II series adjustable frequency drive. It is a modular drive with slots for an HMI module, a communication module, and 2 slots for analog I/O modules. The drive also supports a wide range of control interface options. The 1336F-B020-AN-EN-GM1-HAS1-L4 drive comes with several interface modules built into it, and other modules can be ordered separately if needed. The communication module installed on the drive supports single-point Remote I/O communication. The HMI module installed on the drive is a programmer/controller HMI with an analog potentiometer. The control interface on the 1336F-B020-AN-EN-GM1-HAS1-L4 drive is a TTL contact control interface. The enclosure of the drive is open and it is IP 00 rated. The drive’s approximate weight is 22.7 kilograms and it measures 476.3 x 276.4 x 88.9 millimeters in dimensions.

The Allen-Bradley 1336F-B020-AN-EN-GM1-HAS1-L4 1336 PLUS II series adjustable frequency drive is supplied with a heatsink for improved heat dissipation. The drive can be mounted with the heatsink either inside or outside the control cabinet that is used to give it additional protection. The total heat dissipated by the drive is 768 Watts. The information required for accurate cabinet sizing is available in the drive’s manual. The ideal ambient temperature range for drive operation is 0 to 50 degrees Celsius. The 1336F-B020-AN-EN-GM1-HAS1-L4 drive delivers 20 Horsepower of maximum output when connected to 380 to 480 Volts AC 3-phase input voltage. The 1336F-B020-AN-EN-GM1-HAS1-L4 drive delivers only 10 Horsepower of output when connected to single-phase AC input voltage. The operating language supported by the drive is English. Only approved accessories should be used with the drive and only trained personnel should install, operate, or repair the drive.