1336F-B020-AN-EN-HAS1-L4

The Allen-Bradley 1336F-B020-AN-EN-HAS1-L4 drive is a 1336 PLUS II series adjustable frequency drive. It is deployed for motor control in industrial and commercial applications. The drive operates at input voltages ranging from 380 to 480 Volts AC. The 1336F-B020-AN-EN-HAS1-L4 drive is suitable for use on circuits that are capable of delivering up to 200,000 RMS symmetrical Amps and up to 600 Volts. To prevent injury and equipment damage, only the recommended types of line fuses should be used. The drive is designed to operate on power supply systems where the line voltages are symmetrical. The 1336F-B020-AN-EN-HAS1-L4 drive includes surge-suppression devices for protection against lightning-induced overvoltages between the ground and line. Suitable isolation can be used for systems where there is a potential for abnormally high phase-to-ground voltages. A Metal Oxide Varistor (MOV) on the drive provides surge protection according to the IEEE 587 standards.

The Allen-Bradley 1336F-B020-AN-EN-HAS1-L4 1336 PLUS II series adjustable frequency drive can be installed with either an input circuit breaker or input fuses for protection. National and local codes may also determine any additional requirements for such installations. The 1336F-B020-AN-EN-HAS1-L4 drive has an input voltage rating of 380 to 480 Volts AC. The drive operates with either single-phase or 3-phase input line voltage. The full rated 20-Horsepower output is only available with 3-phase input voltage. The HMI module installed on the drive includes a controller/programmer option and also an analog potentiometer. The control interface installed on the 1336F-B020-AN-EN-HAS1-L4 drive is a TTL contact control interface. The 1336F-B020-AN-EN-HAS1-L4 drive is supplied in an open enclosure with an IP 00 rating that cannot protect it from dust and moisture. For additional protection, the 1336F-B020-AN-EN-HAS1-L4 drive should be operated only when it is installed inside a suitable cabinet.