1336F-B020-AN-EN-HAS1-L6

The Allen-Bradley 1336F-B020-AN-EN-HAS1-L6 adjustable frequency drive is a 1336 PLUS II series digital AC drive. The frame size of the drive is Size B. The drive nameplate is located on the mounting plate of the drive’s main control board. The drive is suitable for vertical mounting. Four mounting holes on the enclosure allow for easy but secure drive mounting. The enclosure of the 1336F-B020-AN-EN-HAS1-L6 drive is open. Its protection rating is IP 00. The weight of the drive is approximately 50 pounds. The dimensions of the drive housing are 476.3 x 276.4 x 88.9 millimeters. The drive cools via natural convection and its rated heat dissipation level is 768 Watts. A heatsink on the drive enhances the speed of the heat dissipation. The ambient temperature range for which the drive is designed is from 0 to 50 degrees Celsius. The elevation range for which the drive is designed is 0 to 1000 meters above sea level. Drive operation outside these recommended limits leads to output derating and potentially to drive damage.

The Allen-Bradley 1336F-B020-AN-EN-HAS1-L6 1336 PLUS II series adjustable frequency drive operates at 380 to 480 Volts AC input voltage. Its rated output power for the constant torque mode is 20 Horsepower. The drive output power rating for the variable torque mode is 25 Horsepower. The 1336F-B020-AN-EN-HAS1-L6 drive includes an HMI module. The HMI module includes a programmer/controller function and an analog potentiometer. The drive also has a slot for a communication module and 2 slots for analog modules that are not occupied. These slots can be filled with suitable modules depending upon application requirements. The drive comes with a control interface rated for 115 Volts AC voltage. The 1336F-B020-AN-EN-HAS1-L6 drive and its associated equipment should only be installed by trained personnel. Additionally, only approved accessories should be used to customize the drive and only approved spare parts should be used to repair the drive.