1336F-B020-AN-EN-HASB-L6-MX3

The Allen-Bradley 1336F-B020-AN-EN-HASB-L6-MX3 adjustable frequency drive is a 1336 PLUS II series drive with a conformal coat. This conformal coating is applied to the drive to protect it against dust, moisture, and chemicals in adverse industrial environments. The enclosure of the 1336F-B020-AN-EN-HASB-L6-MX3 drive is open and its environmental protection rating is IP 00. This means that the enclosure does not provide any protection against solids or liquids in the environment. Therefore, the 1336F-B020-AN-EN-HASB-L6-MX3 drive should be mounted inside a suitable control cabinet for additional protection. This drive is designed for vertical mounting. It comes with a heatsink that promotes efficient heat dissipation. An on-board microprocessor monitors the temperature of the heatsink, and this temperature monitoring protects the 1336F-B020-AN-EN-HASB-L6-MX3 drive from overloads because it trips if the temperature threshold is reached.

The Allen-Bradley 1336F-B020-AN-EN-HASB-L6-MX3 1336 PLUS II series adjustable frequency drive is designed for 380 to 480 Volts AC input voltage. Drives with Size B frames such as the 1336F-B020-AN-EN-HASB-L6-MX3 drive support 3-phase and single-phase AC input voltage. The full rated output power of 20 Horsepower is valid for 3-phase input only. The output of the drive derates by 50% with single-phase AC input. A snap-in HMI is not supplied with the 1336F-B020-AN-EN-HASB-L6-MX3 drive. Instead, there is a blank cover plate that is installed over the opening for an HMI on the front of the drive enclosure. This plate prevents unauthorized access to high-voltage drive components and keeps dust and moisture away from the drive’s internal components. The drive operates in English with an English language module. The control interface on the 1336F-B020-AN-EN-HASB-L6-MX3 drive operates at 115 Volts AC.