Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B020-AN-EN-MX3

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B020-AN-EN-MX3

|

The Allen-Bradley 1336F-B020-AN-EN-MX3 drive is a digital adjustable frequency drive from the 1336 PLUS II drive series. It features a circuit board with a conformal coat for protection. The maximum rated drive output is 20 Horsepower.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B020-AN-EN-MX3

ManufacturerAllen Bradley
Product TypeAdjustable Frequency Drive
Product Line1336 PLUS II Drives
Part Number1336F-B020-AN-EN-MX3
Weight85.00 lbs (38.56 kg)
Conformal CoatingYes
Input Voltage380 to 480 Volts AC
Rated Output20 Horsepower
Frame SizeB
EnclosureOpen
Protection RatingIP 00
Output Frequency0 to 400 Hertz
Maximum Altitude1000 Meters (3300 Feet)
Maximum Operating Temperature50 degrees Celsius

The Allen-Bradley 1336F-B020-AN-EN-MX3 adjustable frequency drive is an industrial AC-powered drive for controlling motors. A conformal coating has been applied to the drive’s circuit board to protect it against dust, chemicals, extreme temperatures, and moisture. The product line to which the 1336F-B020-AN-EN-MX3 drive belongs is the Allen-Bradley 1336 PLUS II series. It is used to accelerate and decelerate induction motors gently and to adjust the torque ratings of the motors. The input voltage range of the 1336F-B020-AN-EN-MX3 drive is from 380 to 480 Volts AC input. Under all of the specified ambient and operating conditions, the drive delivers 20 Horsepower of output power in the constant torque operating mode.

The ideal specified operating conditions for the Allen-Bradley 1336F-B020-AN-EN-MX3 1336 PLUS II series adjustable frequency drive include 4 kilohertz of PWM carrier frequency and 3-phase AC input voltage. The full range of PWM carrier frequencies supported by the drive is 2 to 8 kilohertz. All of the drive specifications included in the manual are valid for 4 kilohertz of carrier frequency. When the 1336F-B020-AN-EN-MX3 drive is connected to single-phase AC input, the output rating is only 10 Horsepower because of 50% derating. The drive is available in an open enclosure. Its ingress protection rating is IP 00. The 1336F-B020-AN-EN-MX3 drive is fitted with a heatsink. The total heat dissipation rating of the drive is 786 Watts. The operating temperature range of the drive is 0 to 50 degrees Celsius at an ambient relative humidity range of 5 to 95% without condensation. The approximate shipping weight of the 1336F-B020-AN-EN-MX3 drive is 50 pounds.