1336F-B020-AN-EN910-L6

The Allen-Bradley 1336F-B020-AN-EN910-L6 drive is a modular AC-powered adjustable frequency drive. It belongs to the 1336 PLUS II series of Allen-Bradley adjustable frequency drives. The drive is designed for industrial motor control applications. It is used primarily for controlling the speed and torque of motors in high-precision applications. The 1336F-B020-AN-EN910-L6 drive is supplied in an open enclosure with an IP 00 protection rating. This rating means that the drive is not protected against dust and moisture in the operating environment. Therefore, the drive cannot be used outdoors, and it should only be used indoors with appropriate protection. The drive can be mounted inside a control cabinet with the appropriate protection rating for additional protection against dust and moisture. The 1336F-B020-AN-EN910-L6 drive is designed for operating at ambient temperatures between 0 and 50 degrees Celsius. Higher temperatures cause the internal drive temperature to increase dangerously and may lead to component failure.

The Allen-Bradley 1336F-B020-AN-EN910-L6 1336 PLUS II series adjustable frequency drive delivers 20 Horsepower of output power in the constant torque operating mode. The drive supports sine-coded PWM motor control with configurable carrier frequency. The technical data for the drive that is listed in the manual is valid for 4 kilohertz of carrier frequency. However, the drive supports carrier frequencies ranging from 2 to 8 kilohertz. The input of the 1336F-B020-AN-EN910-L6 drive is designed for connection to AC systems that can supply it with 380 to 480 Volts AC. The control interface on the drive is rated for 115 Volts AC. The approximate weight of the drive is 50 pounds. The 1336F-B020-AN-EN910-L6 drive and associated devices should be installed and operated by trained personnel only.