Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B020-AN-IT

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B020-AN-IT

|
Need a Specific Revision?

The Allen-Bradley 1336F-B020-AN-IT drive is a 1336 PLUS II series adjustable frequency drive. It includes an Italian language module but no interface modules. The maximum drive output power rating is 20 Horsepower.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B020-AN-IT

ManufacturerAllen Bradley
Product TypeAdjustable Frequency Drive
Product Line1336 PLUS II Drives
Part Number1336F-B020-AN-IT
Weight85.00 lbs (38.56 kg)
Language ModuleItalian
Input Voltage380 to 480 Volts AC
Rated Output Power20 Horsepower
HMINone
HeatsinkSupported
Maximum Altitude1000 Meters (3300 Feet)
EnclosureOpen
Protection RatingIP 00
Request a Repair

The Allen-Bradley 1336F-B020-AN-IT drive is an adjustable frequency drive that has been manufactured in the 1336 PLUS II series. It has both constant torque and variable torque capabilities. The manual for the drive lists performance specifications that are valid for 3-phase AC input voltage, 4 kilohertz of rated carrier frequency, and operation under all of the manufacturer’s recommended ambient conditions. The input voltage range for the drive is from 380 to 480 Volts AC for both 3-phase and 1-phase input voltage. With 1-phase AC input voltage, the output of the drive derates by at least 50%. The 1336F-B020-AN-IT drive is supplied in an open enclosure that has an IP 00 environmental protection rating. It weighs about 50 pounds during shipping. The frame size of the drive is Size B. The dimensions of the drive are 18.75 x 10.88 x 3.5 inches. A heatsink on the drive includes a temperature sensor, and the drive is set to trip if the heatsink temperature exceeds a predefined threshold.

The Allen-Bradley 1336F-B020-AN-IT 1336 PLUS II series adjustable frequency drive can be installed in a cabinet for additional protection, and it can be mounted with the heatsink either inside or outside the cabinet. This means that either large or small cabinets can be used. For larger cabinets, the 1336F-B020-AN-IT drive can be mounted with the heatsink inside the cabinet, and for smaller cabinets, the drive can be mounted with the heatsink outside the cabinet. The combined heat dissipation rating of the drive and its heatsink is 768 Watts. The operating temperature range for the drive is 0 to 50 degrees Celsius. The 1336F-B020-AN-IT drive operates in Italian by default. It has an Italian language module but no interface modules of any kind. Some of the drive components are ESD-sensitive, and the technicians operating or servicing the drive should take all of the relevant ESD precautions to protect the drive. The bus capacitors on the drive should be completely discharged prior to any maintenance activity to prevent electric shock.