Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B025-AA-EN-GM1-HCS1-L6

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B025-AA-EN-GM1-HCS1-L6

|

The Allen-Bradley 1336F-B025-AA-EN-GM1-HCS1-L6 adjustable frequency drive is an AC-powered 1336 PLUS II series drive. It is designed for vertical mounting. The 1336F-B025-AA-EN-GM1-HCS1-L6 drive can operate at full power at 380 to 480 Volts AC 3-phase input voltage.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B025-AA-EN-GM1-HCS1-L6

ManufacturerAllen Bradley
Product TypeAC Drive
Product Line1336 PLUS II Drives
Part Number1336F-B025-AA-EN-GM1-HCS1-L6
Weight35.00 lbs (15.88 kg)
Input Voltage380 to 480 Volts AC
Rated Output Power25 Horsepower
Enclosure TypeNEMA Type 1
Protection ClassIP 20
HeatsinkYes
HMIProgrammer/Controller with Analog Potentiometer
Control Interface115 Volts AC
CommunicationSingle-Point Remote I/O

The Allen-Bradley 1336F-B025-AA-EN-GM1-HCS1-L6 drive is a 1336 PLUS II series adjustable frequency drive. The drive delivers 25 Horsepower of maximum rated output in the constant torque mode. The range of PWM frequencies that the drive supports is 2 to 8 kilohertz. Note that the technical specifications for the drive that are listed in the manual are valid for 4 kilohertz of rated PWM frequency. The 1336F-B025-AA-EN-GM1-HCS1-L6 drive supports 3 motor control methods which include Volts per Hertz control, sine-coded PWM control, and sensorless vector control. The output voltage range of the drive is from 0 to the rated voltage. The output frequency range of the 1336F-B025-AA-EN-GM1-HCS1-L6 drive is 0 to 400 Hertz. The frequency accuracy rating for digital inputs is within +/-0.01% of the maximum output frequency. The frequency accuracy rating for analog inputs is within +/-0.4% of the maximum output frequency.

Additionally, the input voltage rating of the Allen-Bradley 1336F-B025-AA-EN-GM1-HCS1-L6 1336 PLUS II series adjustable frequency drive is 380 to 480 Volts AC. The language option supported by the drive is English. The 1336F-B025-AA-EN-GM1-HCS1-L6 drive is available in a NEMA Type 1 enclosure. The environmental protection rating of the drive is IP 20. The drive cools via convection cooling. This cooling method relies on a steady flow of ambient air over the drive and smooth air flow is necessary for proper heat dissipation. Adequate spacing is also essential for smooth air flow around the drive. The minimum spacing requirements recommended by Allen-Bradley are 4 inches between horizontally-adjacent drives and 6 inches between vertically-adjacent drives. The drive includes a programmer/controller HMI and an analog potentiometer. The 1336F-B025-AA-EN-GM1-HCS1-L6 drive’s control interface is rated for 115 Volts AC. The communication module installed on the drive supports one single-point Remote I/O channel.