Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B030-AA-EN-HCS2-L6

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B030-AA-EN-HCS2-L6

|
Need a Specific Revision?

The 1336F-B030-AA-EN-HCS2-L6 model by Allen Bradley is an adjustable frequency drive. Its power output is rated at 30 HP for both constant and variable torque applications.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B030-AA-EN-HCS2-L6

ManufacturerAllen Bradley
Product TypeAdjustable Frequency Drive
Product Line1336 PLUS II Drives
Part Number1336F-B030-AA-EN-HCS2-L6
Weight50.00 lbs (22.68 kg)
Motor Control MethodSine-Coded PWM with Configurable Carrier Frequency (2-8 kHz, Base: 4 kHz)
Frequency Output Range0-400 Hz Adjustable, ±0.01% Digital Frequency Accuracy
Dynamic Brake CompatibilitySupports External Brake Chopper Kits (e.g., -WB035 for 45-149 kW)
Efficiency97.5% at Rated Load and Nominal Voltage
Ambient Operating Temperature0-40°C (32-104°F) for IP20/NEMA 1 Enclosure
Communication ProtocolsSupports DeviceNet™, Remote I/O, RS232/422/485 (Optional Modules Required)
Rated Power (HP)30 HP Constant Torque / 30 HP Variable Torque
Voltage Input Range380-480V AC, Three-Phase, ±10% Tolerance, 48-62 Hz Frequency
Enclosure RatingIP20 (NEMA Type 1), General Purpose Indoor Use
Output Current Rating45 A Continuous @ 380-480V (Constant Torque)
Input kVA Range30-38 kVA Nominal Input Power (380-480V AC)
Control Interface115V AC Logic Inputs with Programmable Contact Outputs
Human Interface ModuleIntegrated Programmer/Controller with Digital Potentiometer & Data Transfer Capability
Overvoltage ProtectionAC Input Trip: 570V AC; DC Bus Trip: 810V DC
Request a Repair

The 1336F-B030-AA-EN-HCS2-L6 from Allen Bradley is an adjustable frequency drive, functioning efficiently within a voltage input range of 380 to 480V AC. This drive is suitable for applications where constant torque or variable torque is required, rated at 30 horsepower for each configuration. Providing a continuous output current of 45 A, the device operates within a frequency output spectrum adjustable from 0 to 400 Hz, ensuring precise control when needed.

This unit employs a sine-coded PWM motor control method with a configurable carrier frequency that can be adjusted between 2 and 8 kHz, though its default setting is 4 kHz. It delivers high efficiency with a performance rating of 97.5% at nominal voltage and load. The equipment is housed in an IP20/NEMA Type 1 enclosure, making it suitable for indoor use and general-purpose applications.

A dynamic brake chopper kit can be utilized with this drive for enhanced braking capabilities, particularly relevant for setups requiring high responsiveness. The device can also function in ambient temperatures from 0 to 40 degrees Celsius, accommodating typical industrial conditions.

Communication options include support for DeviceNet™, Remote I/O, and RS232/422/485, though some modules may need to be acquired separately. The control interface operates on 115V AC logic, offering programmable contact outputs for flexible integration into existing systems. Additionally, the integrated programmer/controller features a digital potentiometer, facilitating easy data transfer and adjustments. Safety measures are designed into the drive, with overvoltage protections set to trip at 570V AC on the input and 810V DC for the DC bus, promoting reliable operation under variable conditions.