Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 1336 PLUS II Drives 1336F-B030-AA-EN-HCSP-L4

Product image is representative; revision or series may vary. Contact us to request a specific version.

1336F-B030-AA-EN-HCSP-L4

|
Need a Specific Revision?

The 1336F-B030-AA-EN-HCSP-L4 variable frequency motor control drive is an Allen-Bradley/Rockwell Automation drive from the 1336 PLUS II drive series. Its input voltage range is 380 to 480 Volts AC. A drive-mounted HMI and a contact closure interface card are factory-installed on the 1336F-B030-AA-EN-HCSP-L4 drive.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1336F-B030-AA-EN-HCSP-L4

ManufacturerAllen Bradley
CategoryDrives
Product Line1336 PLUS II Drives
Part Number1336F-B030-AA-EN-HCSP-L4
Weight45.00 lbs (20.41 kg)
DescriptionMotor Control Drive
Input Voltage380 to 480 Volts AC
Input Frequency50/60 Hertz
Output Frequency0 to 400 Hertz
Carrier Frequency2 to 8 kilohertz, 4 kilohertz nominal
Power Rating22 kilowatts (30 Horsepower)
Current Rating45 Amps
EnclosureNEMA Type 1, IP 20
Frame SizeB1/B2
HMIProgrammer Only and Upload/Download Capability
Control Interface OptionsContact Closure
LanguageEnglish
Request a Repair

The Allen-Bradley/Rockwell Automation 1336F-B030-AA-EN-HCSP-L4 motor control drive is a digitally programmable, high-performance adjustable frequency drive from the 1336 PLUS II drive series. It offers PWM frequency and voltage output for excellent speed, torque, and positioning control for a wide range of electric motors. The drive has the same basic design as all the other 1336 PLUS II drives as well as the same basic control interface capabilities, device connectivity capabilities, and ease of maintenance. The 1336F-B030-AA-EN-HCSP-L4 drive is well-suited for handling industrial speed control requirements. The drive is rated for an operating voltage range of 380 to 480 Volts AC with 3-phase AC  input. It has a NEMA Type 1 enclosure that is designed specifically for indoor environments where minimal environmental protection is required. The 1336F-B030-AA-EN-HCSP-L4 drive has a Size B1/B2 frame and a standard operating temperature range of 0 to 40 degrees Celsius for operation without derating. It can operate at up to 50 degrees Celsius with derating.

The Allen-Bradley/Rockwell Automation 1336F-B030-AA-EN-HCSP-L4 1336 PLUS II drive motor control drive has a maximum output current rating of 45 Amps for constant torque loads and 48 Amps for variable torque loads. It can accommodate induction motors with horsepower ratings of up to 30 Horsepower (22 kilowatts). The output of the drive can be tuned to meet the needs of specific motor control applications for maximum performance. The 1336F-B030-AA-EN-HCSP-L4 drive includes a drive-mounted HMI that can be used by the drive operators to easily program the drive and modify its operating parameters. This HMI provides precise and continuously accurate motor control features and steady operation. Additionally, during the advanced start-up procedure, the HMI allows the users to conveniently switch between the sensorless vector control and Volts per Hertz control modes. With sensorless vector control, the 1336F-B030-AA-EN-HCSP-L4 drive can deliver a starting torque level of up to 250% of the rated torque.