The 1336F-B030-AE-EN-GM1-HCS2-LA2-L6 motor control drive is an Allen-Bradley 1336 PLUS II series drive that is outfitted with several interface modules. The 1336F-B030-AE-EN-GM1-HCS2-LA2-L6 motor control drive’s interface modules include a control module, an analog interface module, a human-machine interface or HMI module, and also a communication module. The voltage rating of the drive’s control module is 115 Volts AC, while the voltage rating of the drive itself is 380 Volts AC to 480 Volts AC. The drive’s analog interface module is connected to its Slot A analog interface slot and it has 2 inputs which are isolated and which are both fully configurable. The HMI module on the 1336F-B030-AE-EN-GM1-HCS2-LA2-L6 drive is a programmer and controller type of HMI which can upload and download application data for the drive and which also has a digital speed potentiometer.

The communication module on the Allen-Bradley 1336F-B030-AE-EN-GM1-HCS2-LA2-L6 1336 PLUS II series drive has 1 channel that supports the Remote I/O network. The communication module connects to Adapter 6 on the 1336F-B030-AE-EN-GM1-HCS2-LA2-L6 motor control drive. This drive is protected from small quantities of debris by an EMC type of NEMA 1 enclosure with an IP 20 environmental protection rating. The 1336F-B030-AE-EN-GM1-HCS2-LA2-L6 drive is only designed to be used indoors and in clean operating environments. To prevent overheating, the 1336F-B030-AE-EN-GM1-HCS2-LA2-L6 motor control drive must have at least 6 inches of airflow space above and below it and at least 4 inches of airflow space on either side of it between it and adjacent devices. In ideal operating conditions and with 3-phase AC voltage, the 1336F-B030-AE-EN-GM1-HCS2-LA2-L6 drive can put out a nominal Horsepower rating of up to 30 Horsepower.